[PATCH 3/6] ARM: dts: s5pv210: fascinate4g: Remove hardcoded bootargs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since we have uboot (flashed in place of stock kernel),
it's not needed anymore to hardcode bootargs.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
---
 arch/arm/boot/dts/s5pv210-fascinate4g.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ccf761b1babf..07a8d9bbe5b8 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -11,13 +11,6 @@
 
 	chosen {
 		stdout-path = &uart2;
-		/*
-		 * It's hard to change those parameters in stock bootloader,
-		 * since it requires special hardware/cable.
-		 * Let's hardocde bootargs for now, till u-boot port is finished,
-		 * with which it should be easier.
-		 */
-		bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
 	gpio-keys {
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux