On 2018/12/19 22:21, Rob Herring wrote:
> On Mon, Dec 03, 2018 at 11:45:06AM +0800, Yu Chen wrote:
>> This patch adds binding documentation to support usb hub and usb
>> data role switch of Hisilicon HiKey&HiKey960 Board.
>>
>> Cc: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>> Cc: John Stultz <john.stultz@xxxxxxxxxx>
>> Cc: Binghui Wang <wangbinghui@xxxxxxxxxxxxx>
>> Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
>> --
>> v1:
>> 1) Fix some format errors as suggested by Sergei.
>> 2) Modify gpio description to use gpiod API.
>> --
>> ---
>> .../bindings/misc/hisilicon-hikey-usb.txt | 36 ++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
>>
>> diff --git a/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
>> new file mode 100644
>> index 000000000000..f3413d851e18
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
>> @@ -0,0 +1,36 @@
>> +Support usb hub and usb data role switch of Hisilicon HiKey&HiKey960 Board.
>
> s/&/ & /
>
OK.
> Some trivial comments below, but this all needs to use the USB connector
> binding for the OTG and host ports and then we need to figure out how
> the switching fits into that.
>
>> +
>> +-----------------------------
>> +
>> +Required properties:
>> +- compatible: "hisilicon,gpio-hubv1","hisilicon,hikey960-usb"
>> +- typc-vbus-int-gpio: gpio to control the vbus of typeC port
>> +- typc-vbus-enable-val: gpio value that enable the vbus of typeC port
>
> HiKey at least doesn't have a TypeC port.
>Yes. I will re-check the driver for Hikey.
>> +- otg-gpio: gpio to switch DP&DM between the hub and typeC port
>> +- hub-vdd33-en-gpio: gpio to enable the power of hub
>
> -gpios for all these.
OK.
>
>> +- pinctrl-0: pinctrl config
>> +
>> +Example
>> +-----
>> +
>> + hisi_hikey_usb: hisi_hikey_usb {
>> + compatible = "hisilicon,hikey960-usb";
>> + typec-vbus-gpios = <&gpio25 2 0>;
>> + typc-vbus-enable-val = <1>;
>> + otg-switch-gpios = <&gpio25 6 0>;
>> + hub-vdd33-en-gpios = <&gpio5 6 0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&usbhub5734_pmx_func>;
>> +
>> + port {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + hikey_usb_ep: endpoint@0 {
>> + reg = <0>;
>> + device_type = "usb-role-switch";
>
> Drop device_type.
Currently the device_type is used for usb-role-switch match, but it
will be removed after Heikki Krogerus's patch.
>
>> + remote-endpoint = <&dwc3_role_switch_notify>;
>> + };
>> + };
>> +
>> + };
>> --
>> 2.15.0-rc2
>>
>
> .
>
Thanks!
