This patch adds binding documentation to support usb hub and usb
data role switch of Hisilicon HiKey&HiKey960 Board.
Cc: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Cc: Binghui Wang <wangbinghui@xxxxxxxxxxxxx>
Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
--
v1:
1) Fix some format errors as suggested by Sergei.
2) Modify gpio description to use gpiod API.
--
---
.../bindings/misc/hisilicon-hikey-usb.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
diff --git a/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
new file mode 100644
index 000000000000..f3413d851e18
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
@@ -0,0 +1,36 @@
+Support usb hub and usb data role switch of Hisilicon HiKey&HiKey960 Board.
+
+-----------------------------
+
+Required properties:
+- compatible: "hisilicon,gpio-hubv1","hisilicon,hikey960-usb"
+- typc-vbus-int-gpio: gpio to control the vbus of typeC port
+- typc-vbus-enable-val: gpio value that enable the vbus of typeC port
+- otg-gpio: gpio to switch DP&DM between the hub and typeC port
+- hub-vdd33-en-gpio: gpio to enable the power of hub
+- pinctrl-0: pinctrl config
+
+Example
+-----
+
+ hisi_hikey_usb: hisi_hikey_usb {
+ compatible = "hisilicon,hikey960-usb";
+ typec-vbus-gpios = <&gpio25 2 0>;
+ typc-vbus-enable-val = <1>;
+ otg-switch-gpios = <&gpio25 6 0>;
+ hub-vdd33-en-gpios = <&gpio5 6 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbhub5734_pmx_func>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hikey_usb_ep: endpoint@0 {
+ reg = <0>;
+ device_type = "usb-role-switch";
+ remote-endpoint = <&dwc3_role_switch_notify>;
+ };
+ };
+
+ };
--
2.15.0-rc2
