[PATCH 1/2] dt-bindings: regulator: extend tps65218 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add input voltage configuration options

Signed-off-by: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
---
 Documentation/devicetree/bindings/regulator/tps65218.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
index 02f0e9b..a9ee377 100644
--- a/Documentation/devicetree/bindings/regulator/tps65218.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -16,12 +16,22 @@ Required properties:
   regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3.
   Each regulator is defined using the standard binding for regulators.
 
+Optional properties:
+  If any of these properties is absent, the setting will not be touched.
+- strict-supply-voltage: <1|0> Set/Reset STRICT flag in CONFIG1
+- under-voltage-limit: Select 2.75, 2.95, 3.25 or 3.35V as UVLO in CONFIG1
+- under-voltage-hysteresis: Select 200mV or 400mV UVLOHYS in CONFIG2
+
 Example:
 tps65218: tps65218@24 {
 	reg = <0x24>;
 	compatible = "ti,tps65218";
 	interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
 	interrupt-controller;
+	strict-supply-voltage = <1>;
+	under-voltage-hysteresis = <400000>;
+	under-voltage-limit = <3350000>;
+
 	#interrupt-cells = <2>;
 
 	dcdc1: regulator-dcdc1 {
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux