Re: [PATCH v2 2/7] dt-bindings: remoteproc: qcom: Add clock bindings for Q6V5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Doug,
Thanks for the review :)

On 2018-12-18 05:29, Doug Anderson wrote:
Hi,

On Mon, Dec 17, 2018 at 2:07 AM Sibi Sankar <sibis@xxxxxxxxxxxxxx> wrote:

Add missing clock bindings for Q6V5 MSS on SDM845 SoCs.

Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

Fixes: 9f058fa2efb1 ("remoteproc: qcom: Add support for mss remoteproc
on msm8996")
Fixes: fb22022ff63d ("dt-bindings: remoteproc: Add Q6v5 Modem PIL
binding for SDM845")

...it probably doesn't matter too much but if we wanted to be really
careful we could split into two patches, one for the msm8996 and one
for sdm845.  I don't think people care that much about stable
backports of bindings though (someone can feel free to correct me)...


I did think of splitting this up but it doesn't
actually fix 9f058fa2efb1 yet. I noticed a few missing
clocks for mss on 8996 when I did a diff with the
corresponding CAF tree. Hence couldn't add bindings for
it. Will add them once I validate mss on 8996 with the
necessary changes.


diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 9ff5b0309417..780adc043b37 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -39,13 +39,17 @@ on the Qualcomm Hexagon core.
 - clocks:
        Usage: required
        Value type: <phandle>
- Definition: reference to the iface, bus and mem clocks to be held on
-                   behalf of the booting of the Hexagon core
+ Definition: reference to the list of 4 clocks for the modem sub-system + reference to the list of 8 clocks for the modem sub-system
+                   on SDM845 SoCs

The above is confusing because you don't list the SoCs that are
supposed to use the 4 clocks.  How about instead:

Definition: reference to the clocks that match clock-names


AFAIK, only the exceptions are captured. I am fine
with both, I'll wait for Bjorn/Rob's preference.


 - clock-names:
        Usage: required
        Value type: <stringlist>
-       Definition: must be "iface", "bus", "mem"
+ Definition: must be "iface", "bus", "mem", "xo" for the modem sub-system + must be "iface", "bus", "mem", "gpll0_mss", "snoc_axi", + "mnoc_axi", "prng", "xo" for the modem sub-system on SDM845
+                   SoCs

Same here where it's confusing.  ...but also, it it correct?  As far
as I can tell you're missing msm8996.  It's better to just be explicit
and list each one, ideally without all the prose.

Definition: The clocks needed depend on the compatible string:


ditto

qcom,sdm845-mss-pil: "xo", "prng", "iface", "snoc_axi", "bus", "mem",
"gpll0_mss", "mnoc_axi"
qcom,msm8996-mss-pil: "xo", "pnoc", "iface", "bus", "mem", "gpll0_mss_clk"

ditto

qcom,msm8974-mss-pil: "xo", "iface", "bus", "mem"
qcom,msm8916-mss-pil: "xo", "iface", "bus", "mem"
qcom,q6v5-pil: "xo", "iface", "bus", "mem"

...as far as I can tell this binding is supposed to account for
"qcom,ipq8074-wcss-pil" too but it seems that one doesn't have
clock-names.


Yeah the lack of clocks have to be documented
for ipq8074-wcss-pil.. will do it in v3


-Doug

--
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux