Hi Fabrizio, Thanks for your patch. On 2018-12-13 20:21:59 +0000, Fabrizio Castro wrote: > Add the compatible string for RZ/G2E (a.k.a. R8A774C0) to the list > of SoCs supported by rcar-vin driver. > > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > index 7c878ca..34dcd28 100644 > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -7,12 +7,13 @@ family of devices. > Each VIN instance has a single parallel input that supports RGB and YUV video, > with both external synchronization and BT.656 synchronization for the latter. > Depending on the instance the VIN input is connected to external SoC pins, or > -on Gen3 platforms to a CSI-2 receiver. > +on Gen3 and RZ/G2 platforms to a CSI-2 receiver. > > - compatible: Must be one or more of the following > - "renesas,vin-r8a7743" for the R8A7743 device > - "renesas,vin-r8a7744" for the R8A7744 device > - "renesas,vin-r8a7745" for the R8A7745 device > + - "renesas,vin-r8a774c0" for the R8A774C0 device > - "renesas,vin-r8a7778" for the R8A7778 device > - "renesas,vin-r8a7779" for the R8A7779 device > - "renesas,vin-r8a7790" for the R8A7790 device > @@ -60,10 +61,10 @@ The per-board settings Gen2 platforms: > - data-enable-active: polarity of CLKENB signal, see [1] for > description. Default is active high. > > -The per-board settings Gen3 platforms: > +The per-board settings Gen3 and RZ/G2 platforms: > > -Gen3 platforms can support both a single connected parallel input source > -from external SoC pins (port@0) and/or multiple parallel input sources > +Gen3 and RZ/G2 platforms can support both a single connected parallel input > +source from external SoC pins (port@0) and/or multiple parallel input sources > from local SoC CSI-2 receivers (port@1) depending on SoC. > > - renesas,id - ID number of the VIN, VINx in the documentation. > -- > 2.7.4 > -- Regards, Niklas Söderlund
