This binding supersedes the bcm2835-pm-wdt binding which only covered
enough to provide a watchdog, but the HW block is actually mostly
about power domains.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx> (v3)
---
v4: Add the system-power-controller node.
.../bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
new file mode 100644
index 000000000000..3b7d32956391
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
@@ -0,0 +1,46 @@
+BCM2835 PM (Power domains, watchdog)
+
+The PM block controls power domains and some reset lines, and includes
+a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt
+binding which covered some of PM's register range and functionality.
+
+Required properties:
+
+- compatible: Should be "brcm,bcm2835-pm"
+- reg: Specifies base physical address and size of the two
+ register ranges ("PM" and "ASYNC_BRIDGE" in that
+ order)
+- clocks: a) v3d: The V3D clock from CPRMAN
+ b) peri_image: The PERI_IMAGE clock from CPRMAN
+ c) h264: The H264 clock from CPRMAN
+ d) isp: The ISP clock from CPRMAN
+- #reset-cells: Should be 1. This property follows the reset controller
+ bindings[1].
+- #power-domain-cells: Should be 1. This property follows the power domain
+ bindings[2].
+
+Optional properties:
+
+- timeout-sec: Contains the watchdog timeout in seconds
+- system-power-controller: Whether the watchdog is controlling the
+ system power. This node follows the power controller bindings[3].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+[3] Documentation/devicetree/bindings/power/power-controller.txt
+
+Example:
+
+pm {
+ compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+ #power-domain-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x7e100000 0x114>,
+ <0x7e00a000 0x24>;
+ clocks = <&clocks BCM2835_CLOCK_V3D>,
+ <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+ <&clocks BCM2835_CLOCK_H264>,
+ <&clocks BCM2835_CLOCK_ISP>;
+ clock-names = "v3d", "peri_image", "h264", "isp";
+ system-power-controller;
+};
--
2.20.0.rc1
