On Wed, Dec 12, 2018 at 3:13 AM <Claudiu.Beznea@xxxxxxxxxxxxx> wrote: > > > > On 12.12.2018 00:13, Rob Herring wrote: > > On Tue, Nov 27, 2018 at 11:57:25AM +0000, Claudiu.Beznea@xxxxxxxxxxxxx wrote: > >> From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > >> > >> Add documentation for regulator modes and suspend states. > >> > >> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > >> --- > >> .../bindings/regulator/act8945a-regulator.txt | 34 ++++++++++++++++++++++ > >> 1 file changed, 34 insertions(+) > >> > >> diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt > >> index ac955dea00d1..4017527619ab 100644 > >> --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt > >> +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt > >> @@ -15,11 +15,17 @@ Optional input supply properties: > >> - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 > >> > >> Any standard regulator properties can be used to configure the single regulator. > >> +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be > >> +specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h > >> +file. > >> > >> The valid names for regulators are: > >> REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. > >> > >> Example: > >> + > >> +#include <dt-bindings/regulator/active-semi,8945a-regulator.h> > > > > This file belongs in this patch. > > I'm using the defines in this file also in driver. I was thinking that if I > would include this file in this patch the driver compilation would fail if > the patches would be accepted via different trees. They won't be. > Would you like me to have different defines in driver and this new header > or could happen that these patches to be included in the main tree via the > same tree (e.g. regulator tree)? No need for different defines. The subsystem maintainer will take everything in this case. Rob