On 12.12.2018 00:13, Rob Herring wrote:
> On Tue, Nov 27, 2018 at 11:57:25AM +0000, Claudiu.Beznea@xxxxxxxxxxxxx wrote:
>> From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
>>
>> Add documentation for regulator modes and suspend states.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
>> ---
>> .../bindings/regulator/act8945a-regulator.txt | 34 ++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
>> index ac955dea00d1..4017527619ab 100644
>> --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
>> +++ b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
>> @@ -15,11 +15,17 @@ Optional input supply properties:
>> - inl67-supply: The input supply for REG_LDO3 and REG_LDO4
>>
>> Any standard regulator properties can be used to configure the single regulator.
>> +regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
>> +specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h
>> +file.
>>
>> The valid names for regulators are:
>> REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4.
>>
>> Example:
>> +
>> +#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
>
> This file belongs in this patch.
I'm using the defines in this file also in driver. I was thinking that if I
would include this file in this patch the driver compilation would fail if
the patches would be accepted via different trees.
Would you like me to have different defines in driver and this new header
or could happen that these patches to be included in the main tree via the
same tree (e.g. regulator tree)?
Please, let me know what do you think.
Thank you,
Claudiu Beznea
>
>> +
>> pmic@5b {
>> compatible = "active-semi,act8945a";
>> reg = <0x5b>;
>> @@ -32,6 +38,18 @@ Example:
>> regulator-min-microvolt = <1350000>;
>> regulator-max-microvolt = <1350000>;
>> regulator-always-on;
>> +
>> + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
>> + <ACT8945A_REGULATOR_MODE_LOWPOWER>;
>> + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-min-microvolt=<1400000>;
>> + regulator-suspend-max-microvolt=<1400000>;
>> + regulator-changeable-in-suspend;
>> + regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
>> + };
>> };
>>
>> vdd_1v2_reg: REG_DCDC2 {
>> @@ -39,6 +57,14 @@ Example:
>> regulator-min-microvolt = <1100000>;
>> regulator-max-microvolt = <1300000>;
>> regulator-always-on;
>> +
>> + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
>> + <ACT8945A_REGULATOR_MODE_LOWPOWER>;
>> + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> };
>>
>> vdd_3v3_reg: REG_DCDC3 {
>> @@ -53,6 +79,14 @@ Example:
>> regulator-min-microvolt = <2500000>;
>> regulator-max-microvolt = <2500000>;
>> regulator-always-on;
>> +
>> + regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
>> + <ACT8945A_REGULATOR_MODE_LOWPOWER>;
>> + regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> };
>>
>> vdd_3v3_lp_reg: REG_LDO2 {
>> --
>> 2.7.4
>>
>
