On Mon, Dec 10, 2018 at 08:42:11PM +0200, Priit Laes wrote: > ramping for AXP209 DCDC2 and LDO3 regulators and software > based soft-start for AXP209 LDO3 regulator. Ugh.. managed to botch this series. I'll send a fixed one today. > > Both features are needed to work around a PMIC shutdown when > toggling LDO3 on certain boards with high capacitance on the > LDO3 output. > > Similar features (or workarounds) have been also implemented > on u-boot side [1]. > > Changes since v1: > - Rebased on top of next and dropped already merged patches. > - Dropped LDO4 full range devicetree change for Lime2 (prev patch 9) > in favor of general pin-bank regulator dependency [2]. > - Fixed paths in devicetree bindings (patch 3) > - Added note about software based soft-start for LDO3 (patch 5) > > [1] https://lists.denx.de/pipermail/u-boot/2018-November/348612.html > [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-December/618459.html > > Olliver Schinagl (8): > mfd: axp20x: name voltage ramping define properly > regulator: axp20x: add support for set_ramp_delay for AXP209 > dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209 > regulator: axp20x: add software based soft_start for AXP209 LDO3 > dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3 > regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2 > mfd: axp20x: Clean up included headers > mfd: axp20x: use explicit bit defines > > Documentation/devicetree/bindings/mfd/axp20x.txt | 9 +- > arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +- > drivers/mfd/axp20x.c | 13 +- > drivers/regulator/axp20x-regulator.c | 142 +++++++++++++++- > include/linux/mfd/axp20x.h | 4 +- > 5 files changed, 161 insertions(+), 9 deletions(-) > > base-commit: 14cf8c1d5b90a0cf6a8ba51ef59db8da8c7a2622 > -- > git-series 0.9.1 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > For more options, visit https://groups.google.com/d/optout.
