Hi Roger, On 05/12/18 8:49 PM, Roger Quadros wrote: > The AM654 SoC from TI contains a DWC3 controller. Add > support for it. > > Signed-off-by: Roger Quadros <rogerq@xxxxxx> > --- > Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt > index f96e09f..fa29ff8 100644 > --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt > +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt > @@ -3,7 +3,7 @@ TI Keystone Soc USB Controller > DWC3 GLUE > > Required properties: > - - compatible: should be "ti,keystone-dwc3". > + - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3". Convention is to have one compatible per line: compatible: Should be "ti,am654-dwc3" for AM654 SoCs "ti,keystone-dwc3" for K2 SoCs > - #address-cells, #size-cells : should be '1' if the device has sub-nodes > with 'reg' property. > - reg : Address and length of the register set for the USB subsystem on > @@ -21,7 +21,7 @@ SoCs only: > - clock-names: Must be "usb". > > > -The following are mandatory properties for Keystone 2 66AK2G SoCs only: > +The following are mandatory properties for 66AK2G and AM654: > > - power-domains: Should contain a phandle to a PM domain provider node > and an args specifier containing the USB device id > -- Regards Vignesh
