On 04/12/2018 17:53, Jerome Brunet wrote: > The goal of this patchset is to add the internal generation of the > 32768Hz clock within the axg AO clock controller. > > This was initially added has the CEC clock on gxbb. To properly > integrate it on the axg, a simpler 'dual divider' driver is added. > Then gxbb AO clock controller is reworked to use it. Finally the 32k > clock tree is added to the AXG. > > This patchset requires depends on this CCF change [0] > > [0]: https://lkml.kernel.org/r/20181204163257.32085-1-jbrunet@xxxxxxxxxxxx > > Jerome Brunet (5): > dt-bindings: clk: meson: add ao slow clock path ids > clk: meson: clean-up clock registration > clk: meson: add dual divider clock driver > clk: meson: gxbb-ao: replace cec-32k with the dual divider > clk: meson: axg-ao: add 32k generation subtree > > drivers/clk/meson/Makefile | 3 +- > drivers/clk/meson/axg-aoclk.c | 175 +++++++++++++++-- > drivers/clk/meson/axg-aoclk.h | 13 +- > drivers/clk/meson/clk-dualdiv.c | 130 +++++++++++++ > drivers/clk/meson/clkc.h | 19 ++ > drivers/clk/meson/gxbb-aoclk-32k.c | 193 ------------------- > drivers/clk/meson/gxbb-aoclk.c | 238 +++++++++++++++++++----- > drivers/clk/meson/gxbb-aoclk.h | 20 +- > drivers/clk/meson/meson-aoclk.c | 15 +- > include/dt-bindings/clock/axg-aoclkc.h | 7 +- > include/dt-bindings/clock/gxbb-aoclkc.h | 7 + > 11 files changed, 527 insertions(+), 293 deletions(-) > create mode 100644 drivers/clk/meson/clk-dualdiv.c > delete mode 100644 drivers/clk/meson/gxbb-aoclk-32k.c > Good move, it's good to have a common driver to enable USB device support for GX and AXg families since they depends on the slow_clk path. Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> and Acked-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> And applied on next/drivers Neil
