On 05/12/2018 10:50, Neil Armstrong wrote: > On 04/12/2018 17:53, Jerome Brunet wrote: >> The goal of this patchset is to add the internal generation of the >> 32768Hz clock within the axg AO clock controller. >> >> This was initially added has the CEC clock on gxbb. To properly >> integrate it on the axg, a simpler 'dual divider' driver is added. >> Then gxbb AO clock controller is reworked to use it. Finally the 32k >> clock tree is added to the AXG. >> >> This patchset requires depends on this CCF change [0] >> >> [0]: https://lkml.kernel.org/r/20181204163257.32085-1-jbrunet@xxxxxxxxxxxx >> >> Jerome Brunet (5): >> dt-bindings: clk: meson: add ao slow clock path ids >> clk: meson: clean-up clock registration >> clk: meson: add dual divider clock driver >> clk: meson: gxbb-ao: replace cec-32k with the dual divider >> clk: meson: axg-ao: add 32k generation subtree >> >> drivers/clk/meson/Makefile | 3 +- >> drivers/clk/meson/axg-aoclk.c | 175 +++++++++++++++-- >> drivers/clk/meson/axg-aoclk.h | 13 +- >> drivers/clk/meson/clk-dualdiv.c | 130 +++++++++++++ >> drivers/clk/meson/clkc.h | 19 ++ >> drivers/clk/meson/gxbb-aoclk-32k.c | 193 ------------------- >> drivers/clk/meson/gxbb-aoclk.c | 238 +++++++++++++++++++----- >> drivers/clk/meson/gxbb-aoclk.h | 20 +- >> drivers/clk/meson/meson-aoclk.c | 15 +- >> include/dt-bindings/clock/axg-aoclkc.h | 7 +- >> include/dt-bindings/clock/gxbb-aoclkc.h | 7 + >> 11 files changed, 527 insertions(+), 293 deletions(-) >> create mode 100644 drivers/clk/meson/clk-dualdiv.c >> delete mode 100644 drivers/clk/meson/gxbb-aoclk-32k.c >> > > Good move, it's good to have a common driver to enable USB device support for > GX and AXg families since they depends on the slow_clk path. > > Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > > and > > Acked-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > > And applied on next/drivers > > Neil > In fact, I'll wait until the CCF change at [1] is applied on clk-next. Neil