Add MIO-DMAC (Media IO DMA Controller) nodes, and use them as
the DMA engine of SD/eMMC controllers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/uniphier-ld4.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/uniphier-pro4.dtsi | 16 ++++++++++++++++
arch/arm/boot/dts/uniphier-sld8.dtsi | 14 ++++++++++++++
3 files changed, 44 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index b73d594..c2706ce 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -235,6 +235,16 @@
};
};
+ dmac: dma-controller@5a000000 {
+ compatible = "socionext,uniphier-mio-dmac";
+ reg = <0x5a000000 0x1000>;
+ interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+ <0 71 4>, <0 72 4>, <0 73 4>;
+ clocks = <&mio_clk 7>;
+ resets = <&mio_rst 7>;
+ #dma-cells = <1>;
+ };
+
sd: sdhc@5a400000 {
compatible = "socionext,uniphier-sd-v2.91";
status = "disabled";
@@ -246,6 +256,8 @@
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 4>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
@@ -263,6 +275,8 @@
clocks = <&mio_clk 1>;
reset-names = "host", "bridge", "hw";
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 6>;
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 0beb606..97d051e 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -269,6 +269,16 @@
};
};
+ dmac: dma-controller@5a000000 {
+ compatible = "socionext,uniphier-mio-dmac";
+ reg = <0x5a000000 0x1000>;
+ interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+ <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+ clocks = <&mio_clk 7>;
+ resets = <&mio_rst 7>;
+ #dma-cells = <1>;
+ };
+
sd: sdhc@5a400000 {
compatible = "socionext,uniphier-sd-v2.91";
status = "disabled";
@@ -280,6 +290,8 @@
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 4>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
@@ -297,6 +309,8 @@
clocks = <&mio_clk 1>;
reset-names = "host", "bridge", "hw";
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 5>;
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
@@ -313,6 +327,8 @@
clocks = <&mio_clk 2>;
reset-names = "host", "bridge";
resets = <&mio_rst 2>, <&mio_rst 5>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 6>;
bus-width = <4>;
cap-sd-highspeed;
};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index f7fcf6b..efce027 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -239,6 +239,16 @@
};
};
+ dmac: dma-controller@5a000000 {
+ compatible = "socionext,uniphier-mio-dmac";
+ reg = <0x5a000000 0x1000>;
+ interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+ <0 71 4>, <0 72 4>, <0 73 4>;
+ clocks = <&mio_clk 7>;
+ resets = <&mio_rst 7>;
+ #dma-cells = <1>;
+ };
+
sd: sdhc@5a400000 {
compatible = "socionext,uniphier-sd-v2.91";
status = "disabled";
@@ -250,6 +260,8 @@
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 4>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
@@ -267,6 +279,8 @@
clocks = <&mio_clk 1>;
reset-names = "host", "bridge", "hw";
resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ dma-names = "rx-tx";
+ dmas = <&dmac 6>;
bus-width = <8>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
--
2.7.4
