On i.MX6SLL EVK board, there is a debug LED controlled
by MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 pin, add support
for it.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
arch/arm/boot/dts/imx6sll-evk.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index c8e1155..9c90cbd 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -31,6 +31,18 @@
status = "okay";
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
reg_usb_otg1_vbus: regulator-otg1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -455,6 +467,12 @@
>;
};
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059
+ >;
+ };
+
pinctrl_pwm1: pmw1grp {
fsl,pins = <
MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
--
2.7.4
