[PATCH v2 1/2] dt-bindings: i2c-stm32: SYSCFG Fast Mode Plus support for I2C STM32F7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Append optional bindings to update SYSCFG Fast Mode Plus bits if
Fast Mode Plus speed is selected.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
  Version history:
    v2:
    v1:
       * Initial
---
---
 Documentation/devicetree/bindings/i2c/i2c-stm32.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
index 3b54899..69240e1 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
@@ -26,6 +26,11 @@ Optional properties :
 - i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board
   (default: 10)
   I2C Timings are derived from these 2 values
+- st,syscfg-fmp:  Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
+  whether Fast Mode Plus speed is selected by slave.
+	1st cell : phandle to syscfg
+	2nd cell : register offset within SYSCFG
+	3rd cell : register bitmask for FMP bit
 
 Example :
 
@@ -53,4 +58,5 @@ Example :
 		clocks = <&rcc 1 CLK_I2C1>;
 		pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
 		pinctrl-names = "default";
+		st,syscfg-fmp = <&syscfg 0x4 0x1>;
 	};
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux