[PATCH v2 10/12] dt-bindings: panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel

[Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>]

Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.

Add dt-bingings for it.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../display/panel/feiyang,fy07024di26a30d.txt | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt

diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
new file mode 100644
index 000000000000..82caa7b65ae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
@@ -0,0 +1,20 @@
+Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+Required properties:
+- compatible: must be "feiyang,fy07024di26a30d"
+- reg: DSI virtual channel used by that screen
+- avdd-supply: analog regulator dc1 switch
+- dvdd-supply: 3v3 digital regulator
+- reset-gpios: a GPIO phandle for the reset pin
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+panel@0 {
+	compatible = "feiyang,fy07024di26a30d";
+	reg = <0>;
+	avdd-supply = <&reg_dc1sw>;
+	dvdd-supply = <&reg_dldo2>;
+	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+	backlight = <&backlight>;
+};
-- 
2.18.0.321.gffc6fa0e3