Re: [PATCH 14/15] power: supply: olpc_battery: Avoid using platform_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2018-10-19 at 16:50 +0300, Andy Shevchenko wrote:
> On Wed, Oct 10, 2018 at 8:24 PM Lubomir Rintel <lkundrak@xxxxx>
> wrote:
> > This wouldn't work on the DT-based ARM platform. Let's read the EC
> > version
> > directly from the EC driver instead.
> > 
> > This makes the driver no longer x86 specific.
> > 
> > Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> > ---
> >  drivers/power/supply/Kconfig        |  2 +-
> >  drivers/power/supply/olpc_battery.c | 35 +++++++++++++++++++++--
> > ------
> >  2 files changed, 27 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/power/supply/Kconfig
> > b/drivers/power/supply/Kconfig
> > index ff6dab0bf0dd..f0361e4dd457 100644
> > --- a/drivers/power/supply/Kconfig
> > +++ b/drivers/power/supply/Kconfig
> > @@ -151,7 +151,7 @@ config BATTERY_PMU
> > 
> >  config BATTERY_OLPC
> >         tristate "One Laptop Per Child battery"
> > -       depends on X86_32 && OLPC
> > +       depends on OLPC
> >         help
> >           Say Y to enable support for the battery on the OLPC
> > laptop.
> > 
> > diff --git a/drivers/power/supply/olpc_battery.c
> > b/drivers/power/supply/olpc_battery.c
> > index 2a2d7cc995f0..dde9863e5c4a 100644
> > --- a/drivers/power/supply/olpc_battery.c
> > +++ b/drivers/power/supply/olpc_battery.c
> > @@ -20,8 +20,6 @@
> >  #include <linux/sched.h>
> >  #include <linux/olpc-ec.h>
> >  #include <linux/of.h>
> 
> Btw, Kconfig might miss
> depends on OF
> part.

But will it? I thought this header can be included regardless,
providing stubs that always fail instead of actual OF functionality.

It just wouldn't be too useful apart for compile-testing things.

Apart from that, CONFIG_OLPC drags in CONFIG_OF, so we're always
getting CONFIG_OF transitively.

> 
> > -#include <asm/olpc.h>
> > -
> > 
> >  #define EC_BAT_VOLTAGE 0x10    /*
> > uint16_t,    *9.76/32,    mV   */
> >  #define EC_BAT_CURRENT 0x11    /* int16_t,     *15.625/120,
> > mA   */
> > @@ -57,6 +55,7 @@ struct olpc_battery_data {
> >         struct power_supply *olpc_ac;
> >         struct power_supply *olpc_bat;
> >         char bat_serial[17];
> > +       int new_proto;
> >  };
> > 
> >  /*****************************************************************
> > ****
> > @@ -100,7 +99,7 @@ static const struct power_supply_desc
> > olpc_ac_desc = {
> >  static int olpc_bat_get_status(struct olpc_battery_data *data,
> >                 union power_supply_propval *val, uint8_t ec_byte)
> >  {
> > -       if (olpc_platform_info.ecver > 0x44) {
> > +       if (data->new_proto) {
> >                 if (ec_byte & (BAT_STAT_CHARGING |
> > BAT_STAT_TRICKLE))
> >                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
> >                 else if (ec_byte & BAT_STAT_DISCHARGING)
> > @@ -608,14 +607,32 @@ static int olpc_battery_probe(struct
> > platform_device *pdev)
> >         struct power_supply_config psy_cfg = {};
> >         struct olpc_battery_data *data;
> >         uint8_t status;
> > +       unsigned char ecver[1];
> 
> isn't it simple
>  uint8_t ecver;
> ?

Yes, it's probably going to be nicer that way.

> 
> > +       int ret;
> > +
> > +       data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > +       if (!data)
> > +               return -ENOMEM;
> > +       platform_set_drvdata(pdev, data);
> > +
> > +       /* See if the EC is already there and get the EC revision
> > */
> > +       ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, ecver,
> > ARRAY_SIZE(ecver));
> > +       if (ret) {
> > +               if (ret == -ENODEV)
> > +                       return -EPROBE_DEFER;
> 
> Yeah, exactly a question I asked somewhere in the first part of the
> series.
> 
> > +               return ret;
> > +       }
> > 
> > -       /*
> > -        * We've seen a number of EC protocol changes; this driver
> > requires
> > -        * the latest EC protocol, supported by 0x44 and above.
> > -        */
> > -       if (olpc_platform_info.ecver < 0x44) {
> > +       if (ecver[0] > 0x44) {
> > +               /* XO 1 or 1.5 with a new EC firmware. */
> > +               data->new_proto = 1;
> > +       } else if (ecver[0] < 0x44) {
> > +               /*
> > +                * We've seen a number of EC protocol changes; this
> > driver
> > +                * requires the latest EC protocol, supported by
> > 0x44 and above.
> > +                */
> >                 printk(KERN_NOTICE "OLPC EC version 0x%02x too old
> > for "
> > -                       "battery driver.\n",
> > olpc_platform_info.ecver);
> > +                       "battery driver.\n", ecver[0]);
> >                 return -ENXIO;
> >         }
> > 
> > --
> > 2.19.0
> > 

Thanks,
Lubo




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux