This wouldn't work on the DT-based ARM platform. Let's read the EC version
directly from the EC driver instead.
This makes the driver no longer x86 specific.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
drivers/power/supply/Kconfig | 2 +-
drivers/power/supply/olpc_battery.c | 35 +++++++++++++++++++++--------
2 files changed, 27 insertions(+), 10 deletions(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index ff6dab0bf0dd..f0361e4dd457 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -151,7 +151,7 @@ config BATTERY_PMU
config BATTERY_OLPC
tristate "One Laptop Per Child battery"
- depends on X86_32 && OLPC
+ depends on OLPC
help
Say Y to enable support for the battery on the OLPC laptop.
diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
index 2a2d7cc995f0..dde9863e5c4a 100644
--- a/drivers/power/supply/olpc_battery.c
+++ b/drivers/power/supply/olpc_battery.c
@@ -20,8 +20,6 @@
#include <linux/sched.h>
#include <linux/olpc-ec.h>
#include <linux/of.h>
-#include <asm/olpc.h>
-
#define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
#define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
@@ -57,6 +55,7 @@ struct olpc_battery_data {
struct power_supply *olpc_ac;
struct power_supply *olpc_bat;
char bat_serial[17];
+ int new_proto;
};
/*********************************************************************
@@ -100,7 +99,7 @@ static const struct power_supply_desc olpc_ac_desc = {
static int olpc_bat_get_status(struct olpc_battery_data *data,
union power_supply_propval *val, uint8_t ec_byte)
{
- if (olpc_platform_info.ecver > 0x44) {
+ if (data->new_proto) {
if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (ec_byte & BAT_STAT_DISCHARGING)
@@ -608,14 +607,32 @@ static int olpc_battery_probe(struct platform_device *pdev)
struct power_supply_config psy_cfg = {};
struct olpc_battery_data *data;
uint8_t status;
+ unsigned char ecver[1];
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, data);
+
+ /* See if the EC is already there and get the EC revision */
+ ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, ecver, ARRAY_SIZE(ecver));
+ if (ret) {
+ if (ret == -ENODEV)
+ return -EPROBE_DEFER;
+ return ret;
+ }
- /*
- * We've seen a number of EC protocol changes; this driver requires
- * the latest EC protocol, supported by 0x44 and above.
- */
- if (olpc_platform_info.ecver < 0x44) {
+ if (ecver[0] > 0x44) {
+ /* XO 1 or 1.5 with a new EC firmware. */
+ data->new_proto = 1;
+ } else if (ecver[0] < 0x44) {
+ /*
+ * We've seen a number of EC protocol changes; this driver
+ * requires the latest EC protocol, supported by 0x44 and above.
+ */
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
- "battery driver.\n", olpc_platform_info.ecver);
+ "battery driver.\n", ecver[0]);
return -ENXIO;
}
--
2.19.0
