Re: [PATCH v4 03/10] phy: sun4i-usb: add support for H6 USB2 PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2018-11-02五的 14:13 +0530,Kishon Vijay Abraham I写道:
> 
> On 02/11/18 2:11 PM, Icenowy Zheng wrote:
> > 在 2018-10-04四的 20:28 +0800,Icenowy Zheng写道:
> > > The USB 2.0 PHY on Allwinner H6 SoC is similar to older Allwinner
> > > SoCs,
> > > with some USB0 quirk like A83T and PHY index 1/2 missing.
> > > 
> > > Add support for it.
> > > 
> > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> > > Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx>
> > 
> > Excuse me.
> > 
> > Kishon, could you check PATCH 1~3 and queue them?
> > 
> > Even if USB3 support is pending, USB2 support will still be useful,
> > and
> > they're independent.
> 
> I'll queue once -rc1 is tagged.

Ping.

4.20-rc1 is out now.

> 
> Thanks
> Kishon
> 
> > > ---
> > > No changes in v4.
> > > 
> > > Changes in v3:
> > > - Added Chen-Yu's Review tag.
> > > 
> > >  drivers/phy/allwinner/phy-sun4i-usb.c | 19 +++++++++++++++++--
> > >  1 file changed, 17 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> > > b/drivers/phy/allwinner/phy-sun4i-usb.c
> > > index 881078ff73f6..ae16854a770a 100644
> > > --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> > > +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> > > @@ -115,6 +115,7 @@ enum sun4i_usb_phy_type {
> > >  	sun8i_r40_phy,
> > >  	sun8i_v3s_phy,
> > >  	sun50i_a64_phy,
> > > +	sun50i_h6_phy,
> > >  };
> > >  
> > >  struct sun4i_usb_phy_cfg {
> > > @@ -295,7 +296,8 @@ static int sun4i_usb_phy_init(struct phy
> > > *_phy)
> > >  		return ret;
> > >  	}
> > >  
> > > -	if (data->cfg->type == sun8i_a83t_phy) {
> > > +	if (data->cfg->type == sun8i_a83t_phy ||
> > > +	    data->cfg->type == sun50i_h6_phy) {
> > >  		if (phy->index == 0) {
> > >  			val = readl(data->base + data->cfg-
> > > > phyctl_offset);
> > >  			val |= PHY_CTL_VBUSVLDEXT;
> > > @@ -344,7 +346,8 @@ static int sun4i_usb_phy_exit(struct phy
> > > *_phy)
> > >  	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
> > >  
> > >  	if (phy->index == 0) {
> > > -		if (data->cfg->type == sun8i_a83t_phy) {
> > > +		if (data->cfg->type == sun8i_a83t_phy ||
> > > +		    data->cfg->type == sun50i_h6_phy) {
> > >  			void __iomem *phyctl = data->base +
> > >  				data->cfg->phyctl_offset;
> > >  
> > > @@ -959,6 +962,17 @@ static const struct sun4i_usb_phy_cfg
> > > sun50i_a64_cfg = {
> > >  	.phy0_dual_route = true,
> > >  };
> > >  
> > > +static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
> > > +	.num_phys = 4,
> > > +	.type = sun50i_h6_phy,
> > > +	.disc_thresh = 3,
> > > +	.phyctl_offset = REG_PHYCTL_A33,
> > > +	.dedicated_clocks = true,
> > > +	.enable_pmu_unk1 = true,
> > > +	.phy0_dual_route = true,
> > > +	.missing_phys = BIT(1) | BIT(2),
> > > +};
> > > +
> > >  static const struct of_device_id sun4i_usb_phy_of_match[] = {
> > >  	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data =
> > > &sun4i_a10_cfg },
> > >  	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data =
> > > &sun5i_a13_cfg },
> > > @@ -972,6 +986,7 @@ static const struct of_device_id
> > > sun4i_usb_phy_of_match[] = {
> > >  	{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data =
> > > &sun8i_v3s_cfg },
> > >  	{ .compatible = "allwinner,sun50i-a64-usb-phy",
> > >  	  .data = &sun50i_a64_cfg},
> > > +	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data =
> > > &sun50i_h6_cfg },
> > >  	{ },
> > >  };
> > >  MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux