Adds support for the pin and gpio controller found in R7S9210 (RZ/A2) SoCs.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
v3:
- Changed names from Px to PORTx because "PC" is already defined
v2:
- fixed SOC part number in comments
- sorted #includes
- removed spaces in pfc_pin_port_name enum
- put RZA2_NPORTS at the end of pfc_pin_port_name enum
- added RZA2_ to the beginning of all #define macros
- put ( ) around all passed arguments in #define macros
- made helper macros to get register address easier
- use defines for pin direction bit settings
---
drivers/pinctrl/Kconfig | 11 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rza2.c | 530 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 542 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-rza2.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 4d8c00eac742..3e4d890d4bd9 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -195,6 +195,17 @@ config PINCTRL_RZA1
help
This selects pinctrl driver for Renesas RZ/A1 platforms.
+config PINCTRL_RZA2
+ bool "Renesas RZ/A2 gpio and pinctrl driver"
+ depends on OF
+ depends on ARCH_R7S9210 || COMPILE_TEST
+ select GPIOLIB
+ select GENERIC_PINCTRL_GROUPS
+ select GENERIC_PINMUX_FUNCTIONS
+ select GENERIC_PINCONF
+ help
+ This selects pinctrl driver for Renesas RZ/A2 platforms.
+
config PINCTRL_RZN1
bool "Renesas RZ/N1 pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 18a13c1e2c21..712184b74a5c 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o
obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o
+obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o
obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_SIRF) += sirf/
diff --git a/drivers/pinctrl/pinctrl-rza2.c b/drivers/pinctrl/pinctrl-rza2.c
new file mode 100644
index 000000000000..3781c3f693e8
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rza2.c
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Combined GPIO and pin controller support for Renesas RZ/A2 (R7S9210) SoC
+ *
+ * Copyright (C) 2018 Chris Brandt
+ */
+
+/*
+ * This pin controller/gpio combined driver supports Renesas devices of RZ/A2
+ * family.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "core.h"
+#include "pinmux.h"
+
+#define DRIVER_NAME "pinctrl-rza2"
+
+#define RZA2_PINS_PER_PORT 8
+#define RZA2_NPINS (RZA2_PINS_PER_PORT * RZA2_NPORTS)
+#define RZA2_PIN_ID_TO_PORT(id) ((id) / RZA2_PINS_PER_PORT)
+#define RZA2_PIN_ID_TO_PIN(id) ((id) % RZA2_PINS_PER_PORT)
+
+/*
+ * Use 16 lower bits [15:0] for pin identifier
+ * Use 16 higher bits [31:16] for pin mux function
+ */
+#define MUX_PIN_ID_MASK GENMASK(15, 0)
+#define MUX_FUNC_MASK GENMASK(31, 16)
+#define MUX_FUNC_OFFS 16
+#define MUX_FUNC(pinconf) ((pinconf & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
+
+enum pfc_pin_port_name {PORT0, PORT1, PORT2, PORT3, PORT4, PORT5, PORT6, PORT7,
+ PORT8, PORT9, PORTA, PORTB, PORTC, PORTD, PORTE, PORTF,
+ PORTG, PORTH, PORTJ, PORTK, PORTL, PORTM, RZA2_NPORTS};
+static const char port_names[] = "0123456789ABCDEFGHJKLM";
+
+struct rza2_pinctrl_priv {
+ struct device *dev;
+ void __iomem *base;
+
+ struct pinctrl_pin_desc *pins;
+ struct pinctrl_desc desc;
+ struct pinctrl_dev *pctl;
+};
+
+#define RZA2_PDR_BASE(_b) ((_b) + 0x0000) /* 16-bit, 2 bytes apart */
+#define RZA2_PODR_BASE(_b) ((_b) + 0x0040) /* 8-bit, 1 byte apart */
+#define RZA2_PIDR_BASE(_b) ((_b) + 0x0060) /* 8-bit, 1 byte apart */
+#define RZA2_PMR_BASE(_b) ((_b) + 0x0080) /* 8-bit, 1 byte apart */
+#define RZA2_DSCR_BASE(_b) ((_b) + 0x0140) /* 16-bit, 2 bytes apart */
+#define RZA2_PFS_BASE(_b) ((_b) + 0x0200) /* 8-bit, 8 bytes apart */
+#define RZA2_PWPR(_b) ((_b) + 0x02FF) /* 8-bit */
+#define RZA2_PFENET(_b) ((_b) + 0x0820) /* 8-bit */
+#define RZA2_PPOC(_b) ((_b) + 0x0900) /* 32-bit */
+#define RZA2_PHMOMO(_b) ((_b) + 0x0980) /* 32-bit */
+#define RZA2_PCKIO(_b) ((_b) + 0x09D0) /* 8-bit */
+
+#define RZA2_PDR(_b, _port) (RZA2_PDR_BASE(_b) + ((_port) * 2))
+#define RZA2_PODR(_b, _port) (RZA2_PODR_BASE(_b) + (_port))
+#define RZA2_PIDR(_b, _port) (RZA2_PIDR_BASE(_b) + (_port))
+#define RZA2_PMR(_b, _port) (RZA2_PMR_BASE(_b) + (_port))
+#define RZA2_DSCR(_b, _port) (RZA2_DSCR_BASE(_b) + ((_port) * 2))
+#define RZA2_PFS(_b, _port, _pin) (RZA2_PFS_BASE(_b) + ((_port) * 8) \
+ + (_pin))
+#define RZA2_PDR_HIGHZ 0x00
+#define RZA2_PDR_INPUT 0x02
+#define RZA2_PDR_OUTPUT 0x03
+#define RZA2_PDR_MASK 0x03
+
+static void rza2_set_pin_function(void __iomem *pfc_base, u8 port, u8 pin,
+ u8 func)
+{
+ u8 reg8;
+ u16 reg16;
+ u16 mask16;
+
+ /* Set pin to 'Non-use (Hi-z input protection)' */
+ reg16 = readw(RZA2_PDR(pfc_base, port));
+ mask16 = 0x03 << (pin * 2);
+ reg16 &= ~mask16;
+ writew(reg16, RZA2_PDR(pfc_base, port));
+
+ /* Temporarily switch to GPIO */
+ reg8 = readb(RZA2_PMR(pfc_base, port));
+ reg8 &= ~BIT(pin);
+ writeb(reg8, RZA2_PMR(pfc_base, port));
+
+ /* PFS Register Write Protect : OFF */
+ writeb(0x00, RZA2_PWPR(pfc_base)); /* B0WI=0, PFSWE=0 */
+ writeb(0x40, RZA2_PWPR(pfc_base)); /* B0WI=0, PFSWE=1 */
+
+ /* Set Pin function (interrupt disabled, ISEL=0) */
+ writeb(func, RZA2_PFS(pfc_base, port, pin));
+
+ /* PFS Register Write Protect : ON */
+ writeb(0x00, RZA2_PWPR(pfc_base)); /* B0WI=0, PFSWE=0 */
+ writeb(0x80, RZA2_PWPR(pfc_base)); /* B0WI=1, PFSWE=0 */
+
+ /* Port Mode : Peripheral module pin functions */
+ reg8 = readb(RZA2_PMR(pfc_base, port));
+ reg8 |= BIT(pin);
+ writeb(reg8, RZA2_PMR(pfc_base, port));
+}
+
+static void rza2_pin_to_gpio(void __iomem *pfc_base, u8 port, u8 pin, u8 dir)
+{
+ u16 reg16;
+ u16 mask16;
+
+ reg16 = readw(RZA2_PDR(pfc_base, port));
+ mask16 = RZA2_PDR_MASK << (pin * 2);
+ reg16 &= ~mask16;
+
+ if (dir == GPIOF_DIR_IN)
+ reg16 |= RZA2_PDR_INPUT << (pin * 2); /* pin as input */
+ else
+ reg16 |= RZA2_PDR_OUTPUT << (pin * 2); /* pin as output */
+
+ writew(reg16, RZA2_PDR(pfc_base, port));
+}
+
+static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
+ u8 port = offset / 8;
+ u8 pin = offset % 8;
+ u16 reg16;
+
+ reg16 = readw(RZA2_PDR(priv->base, port));
+ reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK;
+
+ if (reg16 == RZA2_PDR_OUTPUT)
+ return GPIOF_DIR_OUT;
+
+ if (reg16 == RZA2_PDR_INPUT)
+ return GPIOF_DIR_IN;
+
+ /*
+ * This GPIO controller has a default Hi-Z state that is not input or
+ * output, so force the pin to input now.
+ */
+ rza2_pin_to_gpio(priv->base, port, pin, GPIOF_DIR_IN);
+
+ return GPIOF_DIR_IN;
+}
+
+static int rza2_chip_direction_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
+ u8 port = offset / 8;
+ u8 pin = offset % 8;
+
+ rza2_pin_to_gpio(priv->base, port, pin, GPIOF_DIR_IN);
+
+ return 0;
+}
+
+static int rza2_chip_direction_output(struct gpio_chip *chip,
+ unsigned int offset, int val)
+{
+ struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
+ u8 port = offset / 8;
+ u8 pin = offset % 8;
+
+ rza2_pin_to_gpio(priv->base, port, pin, GPIOF_DIR_OUT);
+
+ return 0;
+}
+
+static int rza2_chip_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
+ u8 port = offset / 8;
+ u8 pin = offset % 8;
+
+ return (readb(RZA2_PIDR(priv->base, port)) >> pin) & 1;
+}
+
+static void rza2_chip_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip);
+ u8 port = offset / 8;
+ u8 pin = offset % 8;
+ u8 new_value = readb(RZA2_PODR(priv->base, port));
+
+ if (value)
+ new_value |= (1 << pin);
+ else
+ new_value &= ~(1 << pin);
+
+ writeb(new_value, RZA2_PODR(priv->base, port));
+}
+
+static const char * const rza2_gpio_names[] = {
+ "P0_0", "P0_1", "P0_2", "P0_3", "P0_4", "P0_5", "P0_6", "P0_7",
+ "P1_0", "P1_1", "P1_2", "P1_3", "P1_4", "P1_5", "P1_6", "P1_7",
+ "P2_0", "P2_1", "P2_2", "P2_3", "P2_4", "P2_5", "P2_6", "P2_7",
+ "P3_0", "P3_1", "P3_2", "P3_3", "P3_4", "P3_5", "P3_6", "P3_7",
+ "P4_0", "P4_1", "P4_2", "P4_3", "P4_4", "P4_5", "P4_6", "P4_7",
+ "P5_0", "P5_1", "P5_2", "P5_3", "P5_4", "P5_5", "P5_6", "P5_7",
+ "P6_0", "P6_1", "P6_2", "P6_3", "P6_4", "P6_5", "P6_6", "P6_7",
+ "P7_0", "P7_1", "P7_2", "P7_3", "P7_4", "P7_5", "P7_6", "P7_7",
+ "P8_0", "P8_1", "P8_2", "P8_3", "P8_4", "P8_5", "P8_6", "P8_7",
+ "P9_0", "P9_1", "P9_2", "P9_3", "P9_4", "P9_5", "P9_6", "P9_7",
+ "PA_0", "PA_1", "PA_2", "PA_3", "PA_4", "PA_5", "PA_6", "PA_7",
+ "PB_0", "PB_1", "PB_2", "PB_3", "PB_4", "PB_5", "PB_6", "PB_7",
+ "PC_0", "PC_1", "PC_2", "PC_3", "PC_4", "PC_5", "PC_6", "PC_7",
+ "PD_0", "PD_1", "PD_2", "PD_3", "PD_4", "PD_5", "PD_6", "PD_7",
+ "PE_0", "PE_1", "PE_2", "PE_3", "PE_4", "PE_5", "PE_6", "PE_7",
+ "PF_0", "PF_1", "PF_2", "PF_3", "P0_4", "PF_5", "PF_6", "PF_7",
+ "PG_0", "PG_1", "PG_2", "P0_3", "PG_4", "PG_5", "PG_6", "PG_7",
+ "PH_0", "PH_1", "PH_2", "PH_3", "PH_4", "PH_5", "PH_6", "PH_7",
+ /* port I does not exist */
+ "PJ_0", "PJ_1", "PJ_2", "PJ_3", "PJ_4", "PJ_5", "PJ_6", "PJ_7",
+ "PK_0", "PK_1", "PK_2", "PK_3", "PK_4", "PK_5", "PK_6", "PK_7",
+ "PL_0", "PL_1", "PL_2", "PL_3", "PL_4", "PL_5", "PL_6", "PL_7",
+ "PM_0", "PM_1", "PM_2", "PM_3", "PM_4", "PM_5", "PM_6", "PM_7",
+};
+
+static struct gpio_chip chip = {
+ .names = rza2_gpio_names,
+ .base = -1,
+ .ngpio = RZA2_NPINS,
+ .get_direction = rza2_chip_get_direction,
+ .direction_input = rza2_chip_direction_input,
+ .direction_output = rza2_chip_direction_output,
+ .get = rza2_chip_get,
+ .set = rza2_chip_set,
+};
+
+struct pinctrl_gpio_range gpio_range;
+
+static int rza2_gpio_register(struct rza2_pinctrl_priv *priv)
+{
+ struct device_node *np = priv->dev->of_node;
+ struct of_phandle_args of_args;
+ int ret;
+
+ if (!of_property_read_bool(np, "gpio-controller")) {
+ dev_info(priv->dev, "No gpio controller registered\n");
+ return 0;
+ }
+
+ chip.label = devm_kasprintf(priv->dev, GFP_KERNEL, "%pOFn", np);
+ chip.of_node = np;
+ chip.parent = priv->dev;
+
+ ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0,
+ &of_args);
+ if (ret) {
+ dev_err(priv->dev, "Unable to parse gpio-ranges\n");
+ return ret;
+ }
+
+ gpio_range.id = of_args.args[0];
+ gpio_range.name = chip.label;
+ gpio_range.pin_base = gpio_range.base = of_args.args[1];
+ gpio_range.npins = of_args.args[2];
+ gpio_range.gc = &chip;
+
+ /* Register our gpio chip with gpiolib */
+ ret = devm_gpiochip_add_data(priv->dev, &chip, priv);
+ if (ret)
+ return ret;
+
+ /* Register pin range with pinctrl core */
+ pinctrl_add_gpio_range(priv->pctl, &gpio_range);
+
+ dev_dbg(priv->dev, "Registered gpio controller\n");
+
+ return 0;
+}
+
+static int rza2_pinctrl_register(struct rza2_pinctrl_priv *priv)
+{
+ struct pinctrl_pin_desc *pins;
+ unsigned int i;
+ int ret;
+
+ pins = devm_kcalloc(priv->dev, RZA2_NPINS, sizeof(*pins), GFP_KERNEL);
+ if (!pins)
+ return -ENOMEM;
+
+ priv->pins = pins;
+ priv->desc.pins = pins;
+ priv->desc.npins = RZA2_NPINS;
+
+ for (i = 0; i < RZA2_NPINS; i++) {
+ unsigned int pin = RZA2_PIN_ID_TO_PIN(i);
+ unsigned int port = RZA2_PIN_ID_TO_PORT(i);
+
+ pins[i].number = i;
+ pins[i].name = devm_kasprintf(priv->dev, GFP_KERNEL, "P%c_%u",
+ port_names[port], pin);
+ }
+
+ ret = devm_pinctrl_register_and_init(priv->dev, &priv->desc, priv,
+ &priv->pctl);
+ if (ret) {
+ dev_err(priv->dev, "pinctrl registration failed\n");
+ return ret;
+ }
+
+ ret = pinctrl_enable(priv->pctl);
+ if (ret) {
+ dev_err(priv->dev, "pinctrl enable failed\n");
+ return ret;
+ }
+
+ ret = rza2_gpio_register(priv);
+ if (ret) {
+ dev_err(priv->dev, "GPIO registration failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * For each DT node, create a single pin mapping. That pin mapping will only
+ * contain a single group of pins, and that group of pins will only have a
+ * single function that can be selected.
+ */
+static int rza2_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+ unsigned int *num_maps)
+{
+ struct rza2_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
+ struct property *of_pins;
+ int i;
+ unsigned int *pins;
+ unsigned int *psel_val;
+ const char **pin_fn;
+ int ret, npins;
+ int gsel, fsel;
+
+ /* Find out how many pins to map */
+ of_pins = of_find_property(np, "pinmux", NULL);
+ if (!of_pins) {
+ dev_info(priv->dev, "Missing pinmux property\n");
+ return -ENOENT;
+ }
+ npins = of_pins->length / sizeof(u32);
+
+ pins = devm_kcalloc(priv->dev, npins, sizeof(*pins), GFP_KERNEL);
+ psel_val = devm_kcalloc(priv->dev, npins, sizeof(*psel_val),
+ GFP_KERNEL);
+ pin_fn = devm_kzalloc(priv->dev, sizeof(*pin_fn), GFP_KERNEL);
+ if (!pins || !psel_val || !pin_fn)
+ return -ENOMEM;
+
+ /* Collect pin locations and mux settings from DT properties */
+ for (i = 0; i < npins; ++i) {
+ u32 value;
+
+ ret = of_property_read_u32_index(np, "pinmux", i, &value);
+ if (ret)
+ return ret;
+ pins[i] = value & MUX_PIN_ID_MASK;
+ psel_val[i] = MUX_FUNC(value);
+ }
+
+ /* Register a single pin group listing all the pins we read from DT */
+ gsel = pinctrl_generic_add_group(pctldev, np->name, pins, npins, NULL);
+ if (gsel < 0)
+ return gsel;
+
+ /*
+ * Register a single group function where the 'data' is an array PSEL
+ * register values read from DT.
+ */
+ pin_fn[0] = np->name;
+ fsel = pinmux_generic_add_function(pctldev, np->name, pin_fn, 1,
+ psel_val);
+ if (fsel < 0) {
+ ret = fsel;
+ goto remove_group;
+ }
+
+ dev_dbg(priv->dev, "Parsed %s with %d pins\n", np->name, npins);
+
+ /* Create map where to retrieve function and mux settings from */
+ *num_maps = 0;
+ *map = kzalloc(sizeof(**map), GFP_KERNEL);
+ if (!*map) {
+ ret = -ENOMEM;
+ goto remove_function;
+ }
+
+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)->data.mux.group = np->name;
+ (*map)->data.mux.function = np->name;
+ *num_maps = 1;
+
+ return 0;
+
+remove_function:
+ pinmux_generic_remove_function(pctldev, fsel);
+
+remove_group:
+ pinctrl_generic_remove_group(pctldev, gsel);
+
+ dev_info(priv->dev, "Unable to parse DT node %s\n", np->name);
+
+ return ret;
+}
+
+static void rza2_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned int num_maps)
+{
+ kfree(map);
+}
+
+static const struct pinctrl_ops rza2_pinctrl_ops = {
+ .get_groups_count = pinctrl_generic_get_group_count,
+ .get_group_name = pinctrl_generic_get_group_name,
+ .get_group_pins = pinctrl_generic_get_group_pins,
+ .dt_node_to_map = rza2_dt_node_to_map,
+ .dt_free_map = rza2_dt_free_map,
+};
+
+static int rza2_set_mux(struct pinctrl_dev *pctldev, unsigned int selector,
+ unsigned int group)
+{
+ struct rza2_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev);
+ struct function_desc *func;
+ struct group_desc *grp;
+ int i;
+ unsigned int *psel_val;
+
+ grp = pinctrl_generic_get_group(pctldev, group);
+ if (!grp)
+ return -EINVAL;
+
+ func = pinmux_generic_get_function(pctldev, selector);
+ if (!func)
+ return -EINVAL;
+
+ psel_val = func->data;
+
+ for (i = 0; i < grp->num_pins; ++i) {
+ dev_dbg(priv->dev, "Setting P%c_%d to PSEL=%d\n",
+ port_names[RZA2_PIN_ID_TO_PORT(grp->pins[i])],
+ RZA2_PIN_ID_TO_PIN(grp->pins[i]),
+ psel_val[i]);
+ rza2_set_pin_function(
+ priv->base,
+ RZA2_PIN_ID_TO_PORT(grp->pins[i]),
+ RZA2_PIN_ID_TO_PIN(grp->pins[i]),
+ psel_val[i]);
+ }
+
+ return 0;
+}
+
+static const struct pinmux_ops rza2_pinmux_ops = {
+ .get_functions_count = pinmux_generic_get_function_count,
+ .get_function_name = pinmux_generic_get_function_name,
+ .get_function_groups = pinmux_generic_get_function_groups,
+ .set_mux = rza2_set_mux,
+ .strict = true,
+};
+
+static int rza2_pinctrl_probe(struct platform_device *pdev)
+{
+ struct rza2_pinctrl_priv *priv;
+ struct resource *res;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->desc.name = DRIVER_NAME;
+ priv->desc.pctlops = &rza2_pinctrl_ops;
+ priv->desc.pmxops = &rza2_pinmux_ops;
+ priv->desc.owner = THIS_MODULE;
+
+ ret = rza2_pinctrl_register(priv);
+ if (ret)
+ return ret;
+
+ pr_info("RZ/A2 pin controller registered\n");
+
+ return 0;
+}
+
+static const struct of_device_id rza2_pinctrl_of_match[] = {
+ {
+ .compatible = "renesas,r7s9210-pinctrl",
+ },
+ { /* sentinel */ }
+};
+
+static struct platform_driver rza2_pinctrl_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = rza2_pinctrl_of_match,
+ },
+ .probe = rza2_pinctrl_probe,
+};
+
+static int __init rza2_pinctrl_init(void)
+{
+ return platform_driver_register(&rza2_pinctrl_driver);
+}
+core_initcall(rza2_pinctrl_init);
+
+
+MODULE_AUTHOR("Chris Brandt <chris.brandt@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Pin and gpio controller driver for RZ/A2 SoC");
+MODULE_LICENSE("GPL v2");
--
2.16.1
