Re: [PATCH v5 1/5] pinctrl: actions: define constructor generic to Actions Semi SoC's

[Parthiban Nallathambi <pn@xxxxxxx>]

ping on this patch series!

On 9/4/18 8:41 PM, Saravanan Sekar wrote:
> On 08/29/18 17:20, Manivannan Sadhasivam wrote:
> > Hi Saravanan,
> >
> > On Wed, Aug 29, 2018 at 10:24:09AM +0200, Saravanan Sekar wrote:
> > > Move generic defines common to the Owl family out of S900 driver.
> > >
> > > Signed-off-by: Parthiban Nallathambi <pn@xxxxxxx>
> > > Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
> > > ---
> > >   drivers/pinctrl/actions/pinctrl-owl.h  | 131 
> > > +++++++++++++++++++++++++++++++
> > >   drivers/pinctrl/actions/pinctrl-s900.c | 139 
> > > ++-------------------------------
> > >   2 files changed, 137 insertions(+), 133 deletions(-)
> > >
> > > diff --git a/drivers/pinctrl/actions/pinctrl-owl.h 
> > > b/drivers/pinctrl/actions/pinctrl-owl.h
> > > index a724d1d406d4..31cc33d7c4a5 100644
> > > --- a/drivers/pinctrl/actions/pinctrl-owl.h
> > > +++ b/drivers/pinctrl/actions/pinctrl-owl.h
> > > @@ -15,6 +15,136 @@
> > >   #define OWL_PINCONF_SLEW_SLOW 0
> > >   #define OWL_PINCONF_SLEW_FAST 1
> > > +#define MUX_PG(group_name, reg, shift, width)                \
> > > +    {                                \
> > > +        .name = #group_name,                    \
> > > +        .pads = group_name##_pads,                \
> > > +        .npads = ARRAY_SIZE(group_name##_pads),            \
> > > +        .funcs = group_name##_funcs,                \
> > > +        .nfuncs = ARRAY_SIZE(group_name##_funcs),        \
> > > +        .mfpctl_reg  = MFCTL##reg,                \
> > > +        .mfpctl_shift = shift,                    \
> > > +        .mfpctl_width = width,                    \
> > > +        .drv_reg = -1,                        \
> > > +        .drv_shift = -1,                    \
> > > +        .drv_width = -1,                    \
> > > +        .sr_reg = -1,                        \
> > > +        .sr_shift = -1,                        \
> > > +        .sr_width = -1,                        \
> > > +    }
> > > +
> > > +#define DRV_PG(group_name, reg, shift, width)                \
> > > +    {                                \
> > > +        .name = #group_name,                    \
> > > +        .pads = group_name##_pads,                \
> > > +        .npads = ARRAY_SIZE(group_name##_pads),            \
> > > +        .mfpctl_reg  = -1,                    \
> > > +        .mfpctl_shift = -1,                    \
> > > +        .mfpctl_width = -1,                    \
> > > +        .drv_reg = PAD_DRV##reg,                \
> > > +        .drv_shift = shift,                    \
> > > +        .drv_width = width,                    \
> > > +        .sr_reg = -1,                        \
> > > +        .sr_shift = -1,                        \
> > > +        .sr_width = -1,                        \
> > > +    }
> > > +
> > > +#define SR_PG(group_name, reg, shift, width)                \
> > > +    {                                \
> > > +        .name = #group_name,                    \
> > > +        .pads = group_name##_pads,                \
> > > +        .npads = ARRAY_SIZE(group_name##_pads),            \
> > > +        .mfpctl_reg  = -1,                    \
> > > +        .mfpctl_shift = -1,                    \
> > > +        .mfpctl_width = -1,                    \
> > > +        .drv_reg = -1,                        \
> > > +        .drv_shift = -1,                    \
> > > +        .drv_width = -1,                    \
> > > +        .sr_reg = PAD_SR##reg,                    \
> > > +        .sr_shift = shift,                    \
> > > +        .sr_width = width,                    \
> > > +    }
> > > +
> > > +#define FUNCTION(fname)                    \
> > > +    {                        \
> > > +        .name = #fname,                \
> > > +        .groups = fname##_groups,        \
> > > +        .ngroups = ARRAY_SIZE(fname##_groups),    \
> > > +    }
> > > +
> > > +/* PAD PULL UP/DOWN CONFIGURES */
> > > +#define PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)    \
> > > +    {                        \
> > > +        .reg = PAD_PULLCTL##pull_reg,        \
> > > +        .shift = pull_sft,            \
> > > +        .width = pull_wdt,            \
> > > +    }
> > > +
> > > +#define PAD_PULLCTL_CONF(pad_name, pull_reg, pull_sft, pull_wdt)    \
> > > +    struct owl_pullctl pad_name##_pullctl_conf            \
> > > +        = PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)
> > > +
> > > +#define ST_CONF(st_reg, st_sft, st_wdt)            \
> > > +    {                        \
> > > +        .reg = PAD_ST##st_reg,            \
> > > +        .shift = st_sft,            \
> > > +        .width = st_wdt,            \
> > > +    }
> > > +
> > > +#define PAD_ST_CONF(pad_name, st_reg, st_sft, st_wdt)    \
> > > +    struct owl_st pad_name##_st_conf        \
> > > +        = ST_CONF(st_reg, st_sft, st_wdt)
> > > +
> > > +#define PAD_INFO(name)                    \
> > > +    {                        \
> > > +        .pad = name,                \
> > > +        .pullctl = NULL,            \
> > > +        .st = NULL,                \
> > > +    }
> > > +
> > > +#define PAD_INFO_ST(name)                \
> > > +    {                        \
> > > +        .pad = name,                \
> > > +        .pullctl = NULL,            \
> > > +        .st = &name##_st_conf,            \
> > > +    }
> > > +
> > > +#define PAD_INFO_PULLCTL(name)                \
> > > +    {                        \
> > > +        .pad = name,                \
> > > +        .pullctl = &name##_pullctl_conf,    \
> > > +        .st = NULL,                \
> > > +    }
> > > +
> > > +#define PAD_INFO_PULLCTL_ST(name)            \
> > > +    {                        \
> > > +        .pad = name,                \
> > > +        .pullctl = &name##_pullctl_conf,    \
> > > +        .st = &name##_st_conf,            \
> > > +    }
> > > +
> > > +#define OWL_GPIO_PORT_A        0
> > > +#define OWL_GPIO_PORT_B        1
> > > +#define OWL_GPIO_PORT_C        2
> > > +#define OWL_GPIO_PORT_D        3
> > > +#define OWL_GPIO_PORT_E        4
> > > +#define OWL_GPIO_PORT_F        5
> > > +
> > > +#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat, 
> > > _intc_ctl,\
> > > +            _intc_pd, _intc_msk, _intc_type, _share)    \
> > > +    [OWL_GPIO_PORT_##port] = {                \
> > > +        .offset = base,                    \
> > > +        .pins = count,                    \
> > > +        .outen = _outen,                \
> > > +        .inen = _inen,                    \
> > > +        .dat = _dat,                    \
> > > +        .intc_ctl = _intc_ctl,                \
> > > +        .intc_pd = _intc_pd,                \
> > > +        .intc_msk = _intc_msk,                \
> > > +        .intc_type = _intc_type,            \
> > > +        .shared_ctl_offset = _share,            \
> >
> > Above member addition is not related to this patch. What is the purpose
> > of this? Either move this to a separate commit if it is needed by S700
> > or justify in this patch itself.
>
> This is introduced for S700 as registers are shared, it is not case in
> S900. There is impact on S900 also, which needs another seperate patch
> which is unlikely as we cleaning S700 related stuffs here
>
> > Btw, this patch is not applying cleanly.
> >
> > > +    }
> > > +
> > >   enum owl_pinconf_pull {
> > >       OWL_PINCONF_PULL_HIZ,
> > >       OWL_PINCONF_PULL_DOWN,
> > > @@ -148,6 +278,7 @@ struct owl_gpio_port {
> > >       unsigned int intc_pd;
> > >       unsigned int intc_msk;
> > >       unsigned int intc_type;
> > > +    u8 shared_ctl_offset;
> >
> > Same as above.
> >
> > Regards,
> > Mani
> >
> > >   };
> > >   /**
> > > diff --git a/drivers/pinctrl/actions/pinctrl-s900.c 
> > > b/drivers/pinctrl/actions/pinctrl-s900.c
> > > index ea67b14ef93b..0597009d8369 100644
> > > --- a/drivers/pinctrl/actions/pinctrl-s900.c
> > > +++ b/drivers/pinctrl/actions/pinctrl-s900.c
> > > @@ -33,13 +33,6 @@
> > >   #define PAD_SR1            (0x0274)
> > >   #define PAD_SR2            (0x0278)
> > > -#define OWL_GPIO_PORT_A        0
> > > -#define OWL_GPIO_PORT_B        1
> > > -#define OWL_GPIO_PORT_C        2
> > > -#define OWL_GPIO_PORT_D        3
> > > -#define OWL_GPIO_PORT_E        4
> > > -#define OWL_GPIO_PORT_F        5
> > > -
> > >   #define _GPIOA(offset)        (offset)
> > >   #define _GPIOB(offset)        (32 + (offset))
> > >   #define _GPIOC(offset)        (64 + (offset))
> > > @@ -892,55 +885,6 @@ static unsigned int i2c2_sr_pads[]        = { 
> > > I2C2_SCLK, I2C2_SDATA };
> > >   static unsigned int sensor0_sr_pads[]        = { SENSOR0_PCLK,
> > >                               SENSOR0_CKOUT };
> > > -#define MUX_PG(group_name, reg, shift, width)                \
> > > -    {                                \
> > > -        .name = #group_name,                    \
> > > -        .pads = group_name##_pads,                \
> > > -        .npads = ARRAY_SIZE(group_name##_pads),            \
> > > -        .funcs = group_name##_funcs,                \
> > > -        .nfuncs = ARRAY_SIZE(group_name##_funcs),        \
> > > -        .mfpctl_reg  = MFCTL##reg,                \
> > > -        .mfpctl_shift = shift,                    \
> > > -        .mfpctl_width = width,                    \
> > > -        .drv_reg = -1,                        \
> > > -        .drv_shift = -1,                    \
> > > -        .drv_width = -1,                    \
> > > -        .sr_reg = -1,                        \
> > > -        .sr_shift = -1,                        \
> > > -        .sr_width = -1,                        \
> > > -    }
> > > -
> > > -#define DRV_PG(group_name, reg, shift, width)                \
> > > -    {                                \
> > > -        .name = #group_name,                    \
> > > -        .pads = group_name##_pads,                \
> > > -        .npads = ARRAY_SIZE(group_name##_pads),            \
> > > -        .mfpctl_reg  = -1,                    \
> > > -        .mfpctl_shift = -1,                    \
> > > -        .mfpctl_width = -1,                    \
> > > -        .drv_reg = PAD_DRV##reg,                \
> > > -        .drv_shift = shift,                    \
> > > -        .drv_width = width,                    \
> > > -        .sr_reg = -1,                        \
> > > -        .sr_shift = -1,                        \
> > > -        .sr_width = -1,                        \
> > > -    }
> > > -
> > > -#define SR_PG(group_name, reg, shift, width)                \
> > > -    {                                \
> > > -        .name = #group_name,                    \
> > > -        .pads = group_name##_pads,                \
> > > -        .npads = ARRAY_SIZE(group_name##_pads),            \
> > > -        .mfpctl_reg  = -1,                    \
> > > -        .mfpctl_shift = -1,                    \
> > > -        .mfpctl_width = -1,                    \
> > > -        .drv_reg = -1,                        \
> > > -        .drv_shift = -1,                    \
> > > -        .drv_width = -1,                    \
> > > -        .sr_reg = PAD_SR##reg,                    \
> > > -        .sr_shift = shift,                    \
> > > -        .sr_width = width,                    \
> > > -    }
> > >   /* Pinctrl groups */
> > >   static const struct owl_pingroup s900_groups[] = {
> > > @@ -1442,13 +1386,6 @@ static const char * const sirq2_groups[] = {
> > >       "sirq2_dummy",
> > >   };
> > > -#define FUNCTION(fname)                    \
> > > -    {                        \
> > > -        .name = #fname,                \
> > > -        .groups = fname##_groups,        \
> > > -        .ngroups = ARRAY_SIZE(fname##_groups),    \
> > > -    }
> > > -
> > >   static const struct owl_pinmux_func s900_functions[] = {
> > >       [S900_MUX_ERAM] = FUNCTION(eram),
> > >       [S900_MUX_ETH_RMII] = FUNCTION(eth_rmii),
> > > @@ -1500,28 +1437,6 @@ static const struct owl_pinmux_func 
> > > s900_functions[] = {
> > >       [S900_MUX_SIRQ1] = FUNCTION(sirq1),
> > >       [S900_MUX_SIRQ2] = FUNCTION(sirq2)
> > >   };
> > > -/* PAD PULL UP/DOWN CONFIGURES */
> > > -#define PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)            \
> > > -    {                                \
> > > -        .reg = PAD_PULLCTL##pull_reg,                \
> > > -        .shift = pull_sft,                    \
> > > -        .width = pull_wdt,                    \
> > > -    }
> > > -
> > > -#define PAD_PULLCTL_CONF(pad_name, pull_reg, pull_sft, pull_wdt)    \
> > > -    struct owl_pullctl pad_name##_pullctl_conf            \
> > > -        = PULLCTL_CONF(pull_reg, pull_sft, pull_wdt)
> > > -
> > > -#define ST_CONF(st_reg, st_sft, st_wdt)                    \
> > > -    {                                \
> > > -        .reg = PAD_ST##st_reg,                    \
> > > -        .shift = st_sft,                    \
> > > -        .width = st_wdt,                    \
> > > -    }
> > > -
> > > -#define PAD_ST_CONF(pad_name, st_reg, st_sft, st_wdt)            \
> > > -    struct owl_st pad_name##_st_conf                \
> > > -        = ST_CONF(st_reg, st_sft, st_wdt)
> > >   /* PAD_PULLCTL0 */
> > >   static PAD_PULLCTL_CONF(ETH_RXER, 0, 18, 2);
> > > @@ -1639,34 +1554,6 @@ static PAD_ST_CONF(SPI0_SS, 1, 2, 1);
> > >   static PAD_ST_CONF(I2S_BCLK0, 1, 1, 1);
> > >   static PAD_ST_CONF(I2S_MCLK0, 1, 0, 1);
> > > -#define PAD_INFO(name)                            \
> > > -    {                                \
> > > -        .pad = name,                        \
> > > -        .pullctl = NULL,                    \
> > > -        .st = NULL,                        \
> > > -    }
> > > -
> > > -#define PAD_INFO_ST(name)                        \
> > > -    {                                \
> > > -        .pad = name,                        \
> > > -        .pullctl = NULL,                    \
> > > -        .st = &name##_st_conf,                    \
> > > -    }
> > > -
> > > -#define PAD_INFO_PULLCTL(name)                        \
> > > -    {                                \
> > > -        .pad = name,                        \
> > > -        .pullctl = &name##_pullctl_conf,            \
> > > -        .st = NULL,                        \
> > > -    }
> > > -
> > > -#define PAD_INFO_PULLCTL_ST(name)                    \
> > > -    {                                \
> > > -        .pad = name,                        \
> > > -        .pullctl = &name##_pullctl_conf,            \
> > > -        .st = &name##_st_conf,                    \
> > > -    }
> > > -
> > >   /* Pad info table */
> > >   static struct owl_padinfo s900_padinfo[NUM_PADS] = {
> > >       [ETH_TXD0] = PAD_INFO_ST(ETH_TXD0),
> > > @@ -1821,27 +1708,13 @@ static struct owl_padinfo 
> > > s900_padinfo[NUM_PADS] = {
> > >       [SGPIO3] = PAD_INFO_PULLCTL_ST(SGPIO3)
> > >   };
> > > -#define OWL_GPIO_PORT(port, base, count, _outen, _inen, _dat,        \
> > > -            _intc_ctl, _intc_pd, _intc_msk, _intc_type)    \
> > > -    [OWL_GPIO_PORT_##port] = {                    \
> > > -        .offset = base,                        \
> > > -        .pins = count,                        \
> > > -        .outen = _outen,                    \
> > > -        .inen = _inen,                        \
> > > -        .dat = _dat,                        \
> > > -        .intc_ctl = _intc_ctl,                    \
> > > -        .intc_pd = _intc_pd,                    \
> > > -        .intc_msk = _intc_msk,                    \
> > > -        .intc_type = _intc_type,                \
> > > -    }
> > > -
> > >   static const struct owl_gpio_port s900_gpio_ports[] = {
> > > -    OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208, 0x20C, 
> > > 0x240),
> > > -    OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x534, 0x204, 0x208, 
> > > 0x23C),
> > > -    OWL_GPIO_PORT(C, 0x0018, 12, 0x0, 0x4, 0x8, 0x52C, 0x200, 0x204, 
> > > 0x238),
> > > -    OWL_GPIO_PORT(D, 0x0024, 30, 0x0, 0x4, 0x8, 0x524, 0x1FC, 0x200, 
> > > 0x234),
> > > -    OWL_GPIO_PORT(E, 0x0030, 32, 0x0, 0x4, 0x8, 0x51C, 0x1F8, 0x1FC, 
> > > 0x230),
> > > -    OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 
> > > 0x178)
> > > +    OWL_GPIO_PORT(A, 0x0000, 32, 0x0, 0x4, 0x8, 0x204, 0x208, 0x20C, 
> > > 0x240, 0),
> > > +    OWL_GPIO_PORT(B, 0x000C, 32, 0x0, 0x4, 0x8, 0x534, 0x204, 0x208, 
> > > 0x23C, 0),
> > > +    OWL_GPIO_PORT(C, 0x0018, 12, 0x0, 0x4, 0x8, 0x52C, 0x200, 0x204, 
> > > 0x238, 0),
> > > +    OWL_GPIO_PORT(D, 0x0024, 30, 0x0, 0x4, 0x8, 0x524, 0x1FC, 0x200, 
> > > 0x234, 0),
> > > +    OWL_GPIO_PORT(E, 0x0030, 32, 0x0, 0x4, 0x8, 0x51C, 0x1F8, 0x1FC, 
> > > 0x230, 0),
> > > +    OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 
> > > 0x178, 0)
> > >   };
> > >   static struct owl_pinctrl_soc_data s900_pinctrl_data = {
> > > --
> > > 2.14.4

--
Thanks,
Parthiban N

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-22 Fax: (+49)-8142-66989-80 Email: pn@xxxxxxx