Hi, Le jeudi 01 novembre 2018 à 21:00 +0100, Paul Kocialkowski a écrit : > The series adds support for the BL035-RGB-002 LCD panel and the required > device-tree bindings for using it on the BananaPi M1. > > Only the changes related to the DRM driver and the panel are submitted > for merge, which does not include the two final commits. > > Changes since v1: > * Used the full name of the panel for dt bindings; > * Removed helper to match flags in order to only retrieve the connector > once, as it was already done. > * Made the bus flags checking possible without a panel; I forgot to mention that the last patch (not for merge) was untested. > Paul Kocialkowski (7): > drm/sun4i: tcon: Pass encoder instead of using panel for RGB setup > drm/sun4i: tcon: Support an active-low DE signal with RGB interface > dt-bindings: Add vendor prefix for LeMaker > dt-bindings: Add bindings for the LeMaker BL035-RGB-002 LCD panel > drm/panel: simple: Add support for the LeMaker BL035-RGB-002 3.5" LCD > ARM: dts: sun7i: Add pinmux configuration for LCD0 RGB888 pins > ARM: dts: sun7i-a20-bananapi: Add bindings for the LeMaker 3.5" LCD > > .../display/panel/lemaker,bl035-rgb-002.txt | 7 ++ > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm/boot/dts/sun7i-a20-bananapi.dts | 89 +++++++++++++++++++ > arch/arm/boot/dts/sun7i-a20.dtsi | 11 +++ > drivers/gpu/drm/panel/panel-simple.c | 27 ++++++ > drivers/gpu/drm/sun4i/sun4i_tcon.c | 29 +++--- > drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 + > 7 files changed, 151 insertions(+), 14 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt > -- Developer of free digital technology and hardware support. Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
Attachment:
signature.asc
Description: This is a digitally signed message part
