> -----Original Message----- > From: Fabio Estevam [mailto:festevam@xxxxxxxxx] > Sent: Friday, November 2, 2018 12:01 AM [...] > > On Thu, Nov 1, 2018 at 12:53 PM A.s. Dong <aisheng.dong@xxxxxxx> wrote: > > > Can you tell which version were you looking at? > > From my version SPF-29163_A1, it's populated by default. > > Mine is sch-29163-b and it shows both micro SD card and eMMC on the > schematics. > I will check it later. But Rev B may be supported later if changed. > On my board I see only the micro SD card populated, not the eMMC. > > Also, if you are describing the eMMC then why do you pass the card detect > property and only 4 data lines? > > SD0_nRST is only connected to the eMMC card. > > eMMC does not have card detect signal and it uses 8 data lines, so clearly > there is something inconsistent in your dts. > > What exactly do you want to describe: the SD card or the eMMC? I guess we're talking about different schematic versions. The patch is supposed to support Rev A. Regards Dong Aisheng
