DSI controllers are also the hosts of their dsi bus and therefore contain nodes describing the attached panels with their reg properties containing the virtual ids. The dsi controller nodes on rk3399 lacked the #address-cells and #size-cells for these subnodes, so add them. Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> --- changes in v2: none arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index c88e603396f6..4ac7bf547916 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1720,6 +1720,8 @@ resets = <&cru SRST_P_MIPI_DSI0>; reset-names = "apb"; rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; ports { @@ -1754,6 +1756,8 @@ resets = <&cru SRST_P_MIPI_DSI1>; reset-names = "apb"; rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; ports { -- 2.17.0