Hi Taniya,
Both the patches are missing v9 in their subject line - this threw off
patchwork when trying to download the patches.
On Thu, Oct 11, 2018 at 5:06 PM Taniya Das <tdas@xxxxxxxxxxxxxx> wrote:
>
> Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
> SoCs. This is required for managing the cpu frequency transitions which are
> controlled by the hardware engine.
I tested these patches on the sdm845-mtp against 4.19 and found that
the frequency gets stuck at the highest opp (the boost frequency)
after running a couple of 'yes > /dev/null &' instances. Have you
tested these against a mainline kernel?
See cpufreq statistics below:
linaro-test [rc=0]# cat policy?/scaling_cur_freq
300000
2803200
linaro-test [rc=0]# cat policy?/stats/time_in_state
300000 100840
403200 388
480000 71
576000 54
652800 22
748800 11
825600 5
902400 5
979200 9
1056000 3
1132800 2
1228800 5
1324800 8
1420800 2
1516800 1
1612800 0
1689600 0
1766400 392
825600 22048
902400 21
979200 4
1056000 15
1209600 6
1286400 0
1363200 1
1459200 0
1536000 0
1612800 1
1689600 0
1766400 0
1843200 2
1920000 2
1996800 0
2092800 0
2169600 0
2246400 0
2323200 0
2400000 0
2476800 0
2553600 0
2649600 0
2707200 0
2764800 0
2784000 0
2803200 79718
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---
> .../bindings/cpufreq/cpufreq-qcom-hw.txt | 173 +++++++++++++++++++++
> 1 file changed, 173 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> new file mode 100644
> index 0000000..712643f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> @@ -0,0 +1,173 @@
> +Qualcomm Technologies, Inc. CPUFREQ Bindings
> +
> +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
> +SoCs to manage frequency in hardware. It is capable of controlling frequency
> +for multiple clusters.
> +
> +Properties:
> +- compatible
> + Usage: required
> + Value type: <string>
> + Definition: must be "qcom,cpufreq-hw".
> +
> +- clocks
> + Usage: required
> + Value type: <phandle> From common clock binding.
> + Definition: clock handle for XO clock and GPLL0 clock.
> +
> +- clock-names
> + Usage: required
> + Value type: <string> From common clock binding.
> + Definition: must be "xo", "cpu_clk".
> +
> +- reg
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Addresses and sizes for the memory of the HW bases in
> + each frequency domain.
> +- reg-names
> + Usage: Optional
> + Value type: <string>
> + Definition: Frequency domain name i.e.
> + "freq-domain0", "freq-domain1".
> +
> +- freq-domain-cells:
> + Usage: required.
> + Definition: Number of cells in a freqency domain specifier.
> +
> +* Property qcom,freq-domain
> +Devices supporting freq-domain must set their "qcom,freq-domain" property with
> +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
> +
> +
> +Example:
> +
> +Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
> +DCVS state together.
> +
> +/ {
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + L3_0: l3-cache {
> + compatible = "cache";
> + };
> + };
> + };
> +
> + CPU1: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_100>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_100: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU2: cpu@200 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + next-level-cache = <&L2_200>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_200: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU3: cpu@300 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + next-level-cache = <&L2_300>;
> + qcom,freq-domain = <&cpufreq_hw 0>;
> + L2_300: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU4: cpu@400 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x400>;
> + enable-method = "psci";
> + next-level-cache = <&L2_400>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_400: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU5: cpu@500 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x500>;
> + enable-method = "psci";
> + next-level-cache = <&L2_500>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_500: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU6: cpu@600 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x600>;
> + enable-method = "psci";
> + next-level-cache = <&L2_600>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_600: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU7: cpu@700 {
> + device_type = "cpu";
> + compatible = "qcom,kryo385";
> + reg = <0x0 0x700>;
> + enable-method = "psci";
> + next-level-cache = <&L2_700>;
> + qcom,freq-domain = <&cpufreq_hw 1>;
> + L2_700: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> + };
> +
> + soc {
> + cpufreq_hw: cpufreq@17d43000 {
> + compatible = "qcom,cpufreq-hw";
> + reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
> + reg-names = "freq-domain0", "freq-domain1";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
> + clock-names = "xo", "cpu_clk";
> +
> + #freq-domain-cells = <1>
> +
> + };
> +}
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>
