The NXP i.MX 7ULP Evaluation Kit (EVK) provides a platform for rapid evaluation of the i.MX 7ULP, which features NXP's advanced implementation of the Arm® Cortex®-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D Graphics Processing Units (GPUs). The EVK enables HDMI output for simple out-of-the-box to bring up but allows reconfiguration for MIPI displays. The EVK is designed as a System-On-Module(SOM) board that connects to an associated baseboard. The SOM provides 1 GB LPDDR3, 8 MB Quad SPI flash, Micro SD 3.0 card socket, WiFi/ Bluetooth capability, USB 2.0 OTG with Type C connector and an NXP PF1550 power management IC (PMIC). The baseboard provides additional capabilities including a full SD/MMC 3.0 card socket, audio codec, multiple sensors, an HDMI connector, and an alternate MIPI display connector. Additionally, the EVK facilitates software development with the ultimate goal of faster time to market through the support of both Linux® OS and AndroidTM rich operating systems, as well as FreeRTOS. This patch aims to support the preliminary booting up features as follows: GPIO LPUART FEC SD/MMC See more board details: https://www.nxp.com/products/processors-and-microcontrollers/ arm-based-processors-and-mcus/i.mx-applications-processors/ i.mx-7-processors/evaluation-kit-for-the-i.mx-7ulp-applications -processor:MCIMX7ULP-EVK Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> Cc: Fabio Estevam <fabio.estevam@xxxxxxx> Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx> --- ChangeLog: v1->v2: * switch to SPDX license * pad name update * fix Character '_' not recommended in node name * separate from soc.dtsi file --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx7ulp-evk.dts | 94 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 96 insertions(+) create mode 100644 arch/arm/boot/dts/imx7ulp-evk.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d7268ae..39eac9c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -573,6 +573,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb-sht11.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb +dtb-$(CONFIG_SOC_IMX7ULP) += \ + imx7ulp-evk.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts new file mode 100644 index 0000000..d876cb3 --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@xxxxxxx> + */ + +/dts-v1/; + +#include "imx7ulp.dtsi" + +/ { + model = "NXP i.MX7ULP EVK"; + compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp", "Generic DT based system"; + + chosen { + stdout-path = &lpuart4; + }; + + memory@60000000 { + reg = <0x60000000 0x40000000>; + }; + + reg_vsd_3v3: regulator-vsd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc0_rst>; + gpio = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&lpuart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart4>; + status = "okay"; +}; + +&usdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc0_cmd_data>, <&pinctrl_usdhc0_clk>, + <&pinctrl_usdhc0_cd>; + cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_vsd_3v3>; + status = "okay"; +}; + +&iomuxc1 { + pinctrl_lpuart4: lpuart4grp { + pinmux = < + IMX7ULP_PAD_PTC3__LPUART4_RX + IMX7ULP_PAD_PTC2__LPUART4_TX + >; + bias-pull-up; + }; + + pinctrl_usdhc0_cmd_data: usdhc0-cmd-data-grp { + pinmux = < + IMX7ULP_PAD_PTD1__SDHC0_CMD + IMX7ULP_PAD_PTD2__SDHC0_CLK + IMX7ULP_PAD_PTD7__SDHC0_D3 + IMX7ULP_PAD_PTD8__SDHC0_D2 + IMX7ULP_PAD_PTD9__SDHC0_D1 + IMX7ULP_PAD_PTD10__SDHC0_D0 + >; + drive-strength = <1>; + bias-pull-up; + }; + + pinctrl_usdhc0_clk: usdhc0-clk-grp { + pinmux = < + IMX7ULP_PAD_PTD2__SDHC0_CLK + >; + drive-strength = <1>; + bias-pull-down; + }; + + pinctrl_usdhc0_cd: usdhc0-gpio-cd-grp { + pinmux = < + IMX7ULP_PAD_PTC10__PTC10 /* USDHC0 CD */ + >; + bias-pull-up; + }; + + pinctrl_usdhc0_rst: usdhc0-gpio-rst-grp { + pinmux = < + IMX7ULP_PAD_PTD0__PTD0 /* USDHC0 RST */ + >; + bias-pull-up; + }; +}; -- 2.7.4
