[PATCH v2 4/4] doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For USB HSIC, the data and strobe pin needs to be pulled down
at default, we consider it as "idle" state. When the USB host
is ready to be used, the strobe pin needs to be pulled up,
we consider it as "active" state.

Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 529e51879fb2..10c8d793ea49 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -81,6 +81,7 @@ Optional properties:
   mux state of 1 indicates host mode.
 - mux-control-names: Shall be "usb_switch" if mux-controls is specified.
 - pinctrl-names: Names for optional pin modes in "default", "host", "device"
+  Or names for HSIC "idle" and "active" pin modes.
 - pinctrl-n: alternate pin modes
 
 i.mx specific properties
-- 
2.14.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux