Add support for Broadcom STB SoC's to the ohci platform driver.
Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
---
drivers/usb/host/ohci-platform.c | 35 +++++++++++++++++++++++++++++------
include/linux/usb/ohci_pdriver.h | 1 +
2 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 65a1c3fdc88c..363d6fa676a5 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
@@ -99,12 +100,24 @@ static int ohci_platform_probe(struct platform_device *dev)
if (usb_disabled())
return -ENODEV;
- /*
- * Use reasonable defaults so platforms don't have to provide these
- * with DT probing on ARM.
- */
- if (!pdata)
- pdata = &ohci_platform_defaults;
+ if (!pdata) {
+ const struct usb_ohci_pdata *match_pdata;
+
+ match_pdata = of_device_get_match_data(&dev->dev);
+ if (match_pdata) {
+ pdata = devm_kzalloc(&dev->dev, sizeof(*pdata),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ *pdata = *match_pdata;
+ } else {
+ /*
+ * Use reasonable defaults so platforms don't have
+ * to provide these with DT probing on ARM.
+ */
+ pdata = &ohci_platform_defaults;
+ }
+ }
err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
if (err)
@@ -177,6 +190,8 @@ static int ohci_platform_probe(struct platform_device *dev)
ohci->flags |= OHCI_QUIRK_FRAME_NO;
if (pdata->num_ports)
ohci->num_ports = pdata->num_ports;
+ if (pdata->suspend_without_phy_exit)
+ hcd->suspend_without_phy_exit = 1;
#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
@@ -305,10 +320,18 @@ static int ohci_platform_resume(struct device *dev)
}
#endif /* CONFIG_PM_SLEEP */
+static const struct usb_ohci_pdata ohci_plat_brcm_bcm7445_ohci = {
+ .power_on = ohci_platform_power_on,
+ .power_suspend = ohci_platform_power_off,
+ .power_off = ohci_platform_power_off,
+ .suspend_without_phy_exit = 1,
+};
+
static const struct of_device_id ohci_platform_ids[] = {
{ .compatible = "generic-ohci", },
{ .compatible = "cavium,octeon-6335-ohci", },
{ .compatible = "ti,ohci-omap3", },
+ { .compatible = "brcm,bcm7445-ohci", &ohci_plat_brcm_bcm7445_ohci},
{ }
};
MODULE_DEVICE_TABLE(of, ohci_platform_ids);
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
index 7eb16cf587ee..16b24ea1e3bb 100644
--- a/include/linux/usb/ohci_pdriver.h
+++ b/include/linux/usb/ohci_pdriver.h
@@ -35,6 +35,7 @@ struct usb_ohci_pdata {
unsigned big_endian_desc:1;
unsigned big_endian_mmio:1;
unsigned no_big_frame_no:1;
+ unsigned suspend_without_phy_exit:1;
unsigned int num_ports;
/* Turn on all power and clocks */
--
1.9.0.138.g2de3478
