Add support for can 2.0.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
---
drivers/net/can/xilinx_can.c | 34 +++++++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 045f084..7c4f5ad 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -63,6 +63,7 @@ enum xcan_reg {
XCAN_FSR_OFFSET = 0x00E8, /* RX FIFO Status */
XCAN_TXMSG_BASE_OFFSET = 0x0100, /* TX Message Space */
XCAN_RXMSG_BASE_OFFSET = 0x1100, /* RX Message Space */
+ XCAN_RXMSG_2_BASE_OFFSET = 0x2100, /* RX Message Space */
};
#define XCAN_FRAME_ID_OFFSET(frame_base) ((frame_base) + 0x00)
@@ -75,6 +76,8 @@ enum xcan_reg {
XCAN_CANFD_FRAME_SIZE * (n))
#define XCAN_RXMSG_FRAME_OFFSET(n) (XCAN_RXMSG_BASE_OFFSET + \
XCAN_CANFD_FRAME_SIZE * (n))
+#define XCAN_RXMSG_2_FRAME_OFFSET(n) (XCAN_RXMSG_2_BASE_OFFSET + \
+ XCAN_CANFD_FRAME_SIZE * (n))
/* the single TX mailbox used by this driver on CAN FD HW */
#define XCAN_TX_MAILBOX_IDX 0
@@ -152,6 +155,7 @@ enum xcan_reg {
* instead of the regular FIFO at 0x50
*/
#define XCAN_FLAG_RX_FIFO_MULTI 0x0010
+#define XCAN_FLAG_CANFD_2 0x0020
struct xcan_devtype_data {
unsigned int flags;
@@ -221,6 +225,18 @@ static const struct can_bittiming_const xcan_bittiming_const_canfd = {
.brp_inc = 1,
};
+static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 256,
+ .tseg2_min = 1,
+ .tseg2_max = 128,
+ .sjw_max = 128,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
/**
* xcan_write_reg_le - Write a value to the device register little endian
* @priv: Driver private data structure
@@ -973,7 +989,10 @@ static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv)
if (!(fsr & XCAN_FSR_FL_MASK))
return -ENOENT;
- offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+ offset = XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
+ else
+ offset = XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
} else {
/* check if RX FIFO is empty */
@@ -1430,11 +1449,24 @@ static const struct xcan_devtype_data xcan_canfd_data = {
.bus_clk_name = "s_axi_aclk",
};
+static const struct xcan_devtype_data xcan_canfd2_data = {
+ .flags = XCAN_FLAG_EXT_FILTERS |
+ XCAN_FLAG_RXMNF |
+ XCAN_FLAG_TX_MAILBOXES |
+ XCAN_FLAG_CANFD_2 |
+ XCAN_FLAG_RX_FIFO_MULTI,
+ .bittiming_const = &xcan_bittiming_const_canfd2,
+ .btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD,
+ .btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD,
+ .bus_clk_name = "s_axi_aclk",
+};
+
/* Match table for OF platform binding */
static const struct of_device_id xcan_of_match[] = {
{ .compatible = "xlnx,zynq-can-1.0", .data = &xcan_zynq_data },
{ .compatible = "xlnx,axi-can-1.00.a", .data = &xcan_axi_data },
{ .compatible = "xlnx,canfd-1.0", .data = &xcan_canfd_data },
+ { .compatible = "xlnx,canfd-2.0", .data = &xcan_canfd2_data },
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(of, xcan_of_match);
--
2.1.1
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
