Hi. This patchset adds devicetree and slave mode support to pxa2xx SPI controller. The objective is that it will be able to support the OLPC XO 1.75 embedded controller that is a SPI master talking to a MMP2 SOC. The EC driver will be submitted in a separate patch set shortly. These patches have been submitted previously, but not applied: [PATCH v2 01/11] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI [PATCH v2 02/11] PCI: Provide pci_match_id() with CONFIG_PCI=n [PATCH 03/11] spi: pxa2xx: Use an enum for type [PATCH 04/11] spi: pxa2xx: Add devicetree support [PATCH v2 05/11] DT: marvell,mmp2: Add SSP1 and SSP3 These are new: [PATCH 06/11] dt-bindings: spi/spi-pxa2xx: Add spi-slave property [PATCH 07/11] spi: Deal with slaves that return from transfer_one() [PATCH 08/11] spi: pxa2xx: Add slave mode support [PATCH 09/11] dt-bindings: spi/spi-pxa2xx: Add ready GPIO signal [PATCH 10/11] spi: pxa2xx: Add ready signal [PATCH 11/11] spi: pxa2xx: Deal with the leftover garbage in TXFIFO Verified on a OLPC XO 1.75 machine. Thank you, Lubo
