This adds the device tree bindings for the Samsung S6D16D0
panel. This is a command mode only panel using DSI.
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
.../display/panel/samsung,s6d16d0.txt | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
new file mode 100644
index 000000000000..b94e366f451b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt
@@ -0,0 +1,30 @@
+Samsung S6D16D0 4" 864x480 AMOLED panel
+
+Required properties:
+ - compatible: should be:
+ "samsung,s6d16d0",
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd1-supply: I/O voltage supply
+ - reset-gpios: a GPIO spec for the reset pin (active low)
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+
+ panel@0 {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&foo>;
+ reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
--
2.17.1
