Add a few udoo board users for comment.
On Thu, Oct 04, 2018 at 04:33:59PM +0200, Markus Kueffner wrote:
> From: Markus Kueffner <kueffner.markus@xxxxxxxxx>
>
> Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
>
> Signed-off-by: Markus Kueffner <kueffner.markus@xxxxxxxxx>
> ---
> arch/arm/boot/dts/imx6qdl-udoo.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> index 4f27861..5614170 100644
> --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
> @@ -195,6 +195,13 @@
> >;
> };
>
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> pinctrl_usbh: usbhgrp {
> fsl,pins = <
> MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
> @@ -265,6 +272,12 @@
> status = "okay";
> };
>
> +&uart4 { // iMX6-Arduino internal serial port - ttymxc3
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> &usbh1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usbh>;
> --
> 2.7.4
>
