Re: [linux-sunxi] Re: [PATCH 06/12] drm/sun4i: sun6i_mipi_dsi: Fix VBP size calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Saturday 29 September 2018 07:23 PM, Maxime Ripard wrote:
On Thu, Sep 27, 2018 at 09:50:34PM +0530, Jagan Teki wrote:
On Thu, Sep 27, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:

On Thu, Sep 27, 2018 at 05:18:44PM +0530, Jagan Teki wrote:
According to horizontal and vertical timings are defined
per the diagram from include/drm/drm_modes.h

Back porch = [hv]total - [hv]sync_end

So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as
mode->vtotal - mode->vsync_end

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 1c7e42015645..599284971ab6 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -526,8 +526,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
       regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
                    SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
                                              mode->vsync_start) |
-                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start -
-                                            mode->vdisplay));
+                  SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
+                                            mode->vsync_end));

Is it purely theoretical, or did you find some source that back that?

VSA is done as per that, sync_end - sync start would give sync time.

That's a different register though.

VBP also done in BPI-M64-bsp[1] which results back porch existing code
results fron porch.

[1] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L955

That code does back porch - sync length. Such a calculation doesn't
make much sense as is, but you're saying that it results in the front
porch. Again, what makes you say that?

No what code shows is not a real back porch value used for drm it's panel back porch value which is a DTS property in BSP.
(I made wrong comment on previous mail as front porch, sorry)

here is the real code

from drivers/video/sunxi/disp2/disp/de/disp_lcd.c
timmings->ver_sync_time= panel_info->lcd_vspw;
timmings->ver_back_porch= panel_info->lcd_vbp-panel_info->lcd_vspw;


u32 vbp = panel->lcd_vbp;
u32 vspw = panel->lcd_vspw;
dsi_dev[sel]->dsi_basic_size0.bits.vbp = vbp-vspw;

So,

dsi_dev[sel]->dsi_basic_size0.bits.vbp = panel->lcd_vbp - panel->lcd_vspw;

=>  timmings->ver_back_porch + panel_info->lcd_vspw - panel_info->lcd_vspw
=>  timmings->ver_back_porch
=>  mode->vtotal - mode->end

VSA, which a proper value.

dsi_dev[sel]->dsi_basic_size0.bits.vsa = vspw;
=> panel_info->lcd_vspw;
=> timmings->ver_sync_time
=> mode->vsync_end - mode->vsync_start



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux