On Fri, Sep 28, 2018 at 4:01 AM Shawn Guo <shawnguo@xxxxxxxxxx> wrote: > > On Fri, Sep 21, 2018 at 07:47:20PM +0530, Pankaj Bansal wrote: > > The LX2160A QorIQ Development System (QDS) is a test, evaluation, and > > development platform, supporting QorIQ LX2160A processor. > > > > Signed-off-by: Sriram Dash <sriram.dash@xxxxxxx> > > Signed-off-by: Pankaj Bansal <pankaj.bansal@xxxxxxx> > > --- > > > > Notes: > > This patch is dependent on [1] and [2] > > [1] https://lore.kernel.org/patchwork/patch/985935/ > > [2] https://lore.kernel.org/patchwork/patch/985938/ > > I did not receive these. Please add the Shawn Guo and me in "to" recipients when you send next version of these patches. And, btw, I find there is a v3 now, but your link is still pointing to the v2. > > > > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > .../boot/dts/freescale/fsl-lx2160a-qds.dts | 88 ++++++++++++++++++ > > 2 files changed, 89 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > > index 445b72bd5a36..ae80fc5c45f7 100644 > > --- a/arch/arm64/boot/dts/freescale/Makefile > > +++ b/arch/arm64/boot/dts/freescale/Makefile > > @@ -14,3 +14,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb > > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb > > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb > > Please keep them in alphabetic order. > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > > new file mode 100644 > > index 000000000000..5cf2fe279f73 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > > @@ -0,0 +1,88 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +// > > +// Device Tree file for LX2160AQDS > > +// > > +// Copyright 2018 NXP > > + > > +/dts-v1/; > > + > > +#include "fsl-lx2160a.dtsi" > > + > > +/ { > > + model = "NXP Layerscape LX2160AQDS"; > > + compatible = "fsl,lx2160a-qds", "fsl,lx2160a"; > > + > > + chosen { > > + stdout-path = "serial0:115200n8"; > > + }; > > +}; > > + > > +&uart0 { > > + status = "okay"; > > +}; > > + > > +&uart1 { > > + status = "okay"; > > +}; > > + > > +&i2c0 { > > Sort these labeled nodes alphabetically, so that new additions can find > their place easier. > > > + status = "okay"; > > Have a newline between property list and child node. > > Shawn > > > + i2c-mux@77 { > > + compatible = "nxp,pca9547"; > > + reg = <0x77>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + i2c@2 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0x2>; > > + > > + power-monitor@40 { > > + compatible = "ti,ina220"; > > + reg = <0x40>; > > + shunt-resistor = <500>; > > + }; > > + > > + power-monitor@41 { > > + compatible = "ti,ina220"; > > + reg = <0x41>; > > + shunt-resistor = <1000>; > > + }; > > + }; > > + > > + i2c@3 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0x3>; > > + > > + temperature-sensor@4c { > > + compatible = "nxp,sa56004"; > > + reg = <0x4c>; > > + }; > > + > > + temperature-sensor@4d { > > + compatible = "nxp,sa56004"; > > + reg = <0x4d>; > > + }; > > + > > + rtc@51 { > > + compatible = "nxp,pcf2129"; > > + reg = <0x51>; > > + }; > > + }; > > + }; > > +}; > > + > > +&usb0 { > > + status = "okay"; > > +}; > > + > > +&usb1 { > > + status = "okay"; > > +}; > > + > > +&crypto { > > + status = "okay"; > > +}; > > + > > -- > > 2.17.1 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
