On Fri, Sep 21, 2018 at 07:47:20PM +0530, Pankaj Bansal wrote: > The LX2160A QorIQ Development System (QDS) is a test, evaluation, and > development platform, supporting QorIQ LX2160A processor. > > Signed-off-by: Sriram Dash <sriram.dash@xxxxxxx> > Signed-off-by: Pankaj Bansal <pankaj.bansal@xxxxxxx> > --- > > Notes: > This patch is dependent on [1] and [2] > [1] https://lore.kernel.org/patchwork/patch/985935/ > [2] https://lore.kernel.org/patchwork/patch/985938/ I did not receive these. > > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/fsl-lx2160a-qds.dts | 88 ++++++++++++++++++ > 2 files changed, 89 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 445b72bd5a36..ae80fc5c45f7 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -14,3 +14,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb Please keep them in alphabetic order. > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > new file mode 100644 > index 000000000000..5cf2fe279f73 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > @@ -0,0 +1,88 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +// > +// Device Tree file for LX2160AQDS > +// > +// Copyright 2018 NXP > + > +/dts-v1/; > + > +#include "fsl-lx2160a.dtsi" > + > +/ { > + model = "NXP Layerscape LX2160AQDS"; > + compatible = "fsl,lx2160a-qds", "fsl,lx2160a"; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&i2c0 { Sort these labeled nodes alphabetically, so that new additions can find their place easier. > + status = "okay"; Have a newline between property list and child node. Shawn > + i2c-mux@77 { > + compatible = "nxp,pca9547"; > + reg = <0x77>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + > + power-monitor@40 { > + compatible = "ti,ina220"; > + reg = <0x40>; > + shunt-resistor = <500>; > + }; > + > + power-monitor@41 { > + compatible = "ti,ina220"; > + reg = <0x41>; > + shunt-resistor = <1000>; > + }; > + }; > + > + i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + > + temperature-sensor@4c { > + compatible = "nxp,sa56004"; > + reg = <0x4c>; > + }; > + > + temperature-sensor@4d { > + compatible = "nxp,sa56004"; > + reg = <0x4d>; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf2129"; > + reg = <0x51>; > + }; > + }; > + }; > +}; > + > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > + > +&crypto { > + status = "okay"; > +}; > + > -- > 2.17.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
