This patch set is based on the latest Greg's usb.git / usb-testing branch (the commit id is ae8a2ca8a2215c7e31e6d874f7303801bb15fbbc) The previous code set the mode as peripheral mode by the UGCTRL2 register for R-Car D3. But, this SoC can select OTG mode in fact. So, at first, I'd like to revert related patches I submitted in patch 1 and 2. Then, in patch 3, it sets the mode as "OTG" and in patch 4 and 5, it supports for R-Car E3. To use this controller for R-Car D3 and E3, we need the following patch set. Otherwize, the mode will not be changed to peripheral mode by the phy's COMMCTRL register: https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=21629 Yoshihiro Shimoda (5): Revert "usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel" Revert "usb: renesas_usbhs: set the mode by using extcon state for non-otg channel" usb: renesas_usbhs: rcar3: Use OTG mode for R-Car D3 dt-bindings: usb: renesas_usbhs: add bindings for r8a77990 usb: renesas_usbhs: add support for R-Car E3 .../devicetree/bindings/usb/renesas_usbhs.txt | 1 + drivers/usb/renesas_usbhs/common.c | 13 ++++------- drivers/usb/renesas_usbhs/common.h | 1 - drivers/usb/renesas_usbhs/rcar3.c | 27 ++-------------------- 4 files changed, 7 insertions(+), 35 deletions(-) -- 1.9.1
