[PATCH 2/2] hwmon: ina3221: Get channel names from DT node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The connection of channels are usually descirbed in the
schematics, which then should be indicated in DT binding
as well, and further should get exposed to sysfs so as
to help driver users understand what channels are really
monitoring respectively.

Meanwhile, channels could be left unconnected based on
the hardware design. So the channel name should support
NC so the driver could disable the channel accordingly.

Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
---
 drivers/hwmon/ina3221.c | 88 +++++++++++++++++++++++++++++++++++++----
 1 file changed, 80 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index e6b49500c52a..5d487e205260 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -41,9 +41,12 @@
 #define INA3221_CONFIG_MODE_SHUNT	BIT(1)
 #define INA3221_CONFIG_MODE_BUS		BIT(2)
 #define INA3221_CONFIG_MODE_CONTINUOUS	BIT(3)
+#define INA3221_CONFIG_CHx_EN(x)	BIT(14 - (x))
 
 #define INA3221_RSHUNT_DEFAULT		10000
 
+#define INA3221_NOT_CONNECTED		"NC"
+
 enum ina3221_fields {
 	/* Configuration */
 	F_RST,
@@ -91,11 +94,20 @@ static const unsigned int register_channel[] = {
  * @regmap: Register map of the device
  * @fields: Register fields of the device
  * @shunt_resistors: Array of resistor values per channel
+ * @attr_group: attribute groups for sysfs node
+ *              (leave one space at the end for NULL termination)
+ * @channel_name: channel names
+ * @enable: enable or disable channels
  */
 struct ina3221_data {
 	struct regmap *regmap;
 	struct regmap_field *fields[F_MAX_FIELDS];
 	int shunt_resistors[INA3221_NUM_CHANNELS];
+
+	const struct attribute_group *attr_group[INA3221_NUM_CHANNELS + 1];
+	const char *channel_name[INA3221_NUM_CHANNELS];
+
+	bool enable[INA3221_NUM_CHANNELS];
 };
 
 static int ina3221_read_value(struct ina3221_data *ina, unsigned int reg,
@@ -253,6 +265,24 @@ static ssize_t ina3221_show_alert(struct device *dev,
 	return snprintf(buf, PAGE_SIZE, "%d\n", regval);
 }
 
+static ssize_t ina3221_show_name(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
+	struct ina3221_data *ina = dev_get_drvdata(dev);
+	unsigned int channel = sd_attr->index;
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", ina->channel_name[channel]);
+}
+
+/* channel name */
+static SENSOR_DEVICE_ATTR(name1_input, 0444,
+		ina3221_show_name, NULL, INA3221_CHANNEL1);
+static SENSOR_DEVICE_ATTR(name2_input, 0444,
+		ina3221_show_name, NULL, INA3221_CHANNEL2);
+static SENSOR_DEVICE_ATTR(name3_input, 0444,
+		ina3221_show_name, NULL, INA3221_CHANNEL3);
+
 /* bus voltage */
 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO,
 		ina3221_show_bus_voltage, NULL, INA3221_BUS1);
@@ -317,8 +347,8 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO,
 static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO,
 		ina3221_show_shunt_voltage, NULL, INA3221_SHUNT3);
 
-static struct attribute *ina3221_attrs[] = {
-	/* channel 1 */
+static struct attribute *ina3221_channel1_attrs[] = {
+	&sensor_dev_attr_name1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_curr1_input.dev_attr.attr,
 	&sensor_dev_attr_shunt1_resistor.dev_attr.attr,
@@ -328,7 +358,11 @@ static struct attribute *ina3221_attrs[] = {
 	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
 	&sensor_dev_attr_in4_input.dev_attr.attr,
 
-	/* channel 2 */
+	NULL,
+};
+
+static struct attribute *ina3221_channel2_attrs[] = {
+	&sensor_dev_attr_name2_input.dev_attr.attr,
 	&sensor_dev_attr_in2_input.dev_attr.attr,
 	&sensor_dev_attr_curr2_input.dev_attr.attr,
 	&sensor_dev_attr_shunt2_resistor.dev_attr.attr,
@@ -338,7 +372,11 @@ static struct attribute *ina3221_attrs[] = {
 	&sensor_dev_attr_curr2_max_alarm.dev_attr.attr,
 	&sensor_dev_attr_in5_input.dev_attr.attr,
 
-	/* channel 3 */
+	NULL,
+};
+
+static struct attribute *ina3221_channel3_attrs[] = {
+	&sensor_dev_attr_name3_input.dev_attr.attr,
 	&sensor_dev_attr_in3_input.dev_attr.attr,
 	&sensor_dev_attr_curr3_input.dev_attr.attr,
 	&sensor_dev_attr_shunt3_resistor.dev_attr.attr,
@@ -350,7 +388,12 @@ static struct attribute *ina3221_attrs[] = {
 
 	NULL,
 };
-ATTRIBUTE_GROUPS(ina3221);
+
+static const struct attribute_group ina3221_group[INA3221_NUM_CHANNELS] = {
+	{ .attrs = ina3221_channel1_attrs, },
+	{ .attrs = ina3221_channel2_attrs, },
+	{ .attrs = ina3221_channel3_attrs, },
+};
 
 static const struct regmap_range ina3221_yes_ranges[] = {
 	regmap_reg_range(INA3221_SHUNT1, INA3221_BUS3),
@@ -373,10 +416,14 @@ static const struct regmap_config ina3221_regmap_config = {
 static int ina3221_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	const struct device_node *np = client->dev.of_node;
 	struct device *dev = &client->dev;
 	struct ina3221_data *ina;
 	struct device *hwmon_dev;
-	int i, ret;
+	u16 mask = 0, val = 0;
+	const char *str;
+	char prop[32];
+	int i, g, ret;
 
 	ina = devm_kzalloc(dev, sizeof(*ina), GFP_KERNEL);
 	if (!ina)
@@ -407,9 +454,34 @@ static int ina3221_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	/* Fetch hardware information from Device Tree */
+	for (i = 0, g = 0; i < INA3221_NUM_CHANNELS; i++) {
+		/* Fetch the channel name */
+		sprintf(prop, "ti,channel%d-name", i + 1);
+		/* Set a default name on failure */
+		if (of_property_read_string(np, prop, &str))
+			str = "unknown";
+		/* Ignore unconnected channels */
+		if (!strcmp(str, INA3221_NOT_CONNECTED))
+			continue;
+		/* Log connected channels */
+		ina->attr_group[g++] = &ina3221_group[i];
+		ina->channel_name[i] = str;
+		ina->enable[i] = true;
+	}
+
+	/* Disable unconnected channels */
+	for (i = 0; i < INA3221_NUM_CHANNELS; i++) {
+		mask |= INA3221_CONFIG_CHx_EN(i);
+		val |= ina->enable[i] ? INA3221_CONFIG_CHx_EN(i) : 0;
+	}
+	ret = regmap_update_bits(ina->regmap, INA3221_CONFIG, mask, val);
+	if (ret)
+		return ret;
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
-							   client->name,
-							   ina, ina3221_groups);
+							   client->name, ina,
+							   ina->attr_group);
 	if (IS_ERR(hwmon_dev)) {
 		dev_err(dev, "Unable to register hwmon device\n");
 		return PTR_ERR(hwmon_dev);
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux