On 19.9.2018 14:12, Fabio Estevam wrote:
Hi Michal,
On Wed, Sep 19, 2018 at 6:18 AM, Michal Vokáč <michal.vokac@xxxxxxxxx> wrote:
The SSD130x OLED display reset signal is active low. Now the reset
sequence is implemented in such a way that users are forced to
define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.
Do not hard code the active-low sequence into the driver but instead
allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
the real world.
The only single in-tree user of the display is converted and builds
fine.
Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
---
I am not really sure wheater this should be in one commit or the DT
changes should be done in separate commit. Just tell me and I will
split/merge the changes as you want. Thanks.
Please separate in two patches: one for the dts and another for the driver.
OK, thank you. I will send v2 shortly.
Michal
