[PATCH 1/2] video: ssd1307fb: Use gpiod_set_value_cansleep() for reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The reset signal can be produced by GPIO expander that can sleep.
In that case the probe function fails. Allow using GPIO expanders for
the reset signal by using the non-atomic gpiod_set_value_cansleep()
function.

Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
---
 drivers/video/fbdev/ssd1307fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index ba66c02..e7ae135 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -728,9 +728,9 @@ static int ssd1307fb_probe(struct i2c_client *client,
 
 	if (par->reset) {
 		/* Reset the screen */
-		gpiod_set_value(par->reset, 0);
+		gpiod_set_value_cansleep(par->reset, 0);
 		udelay(4);
-		gpiod_set_value(par->reset, 1);
+		gpiod_set_value_cansleep(par->reset, 1);
 		udelay(4);
 	}
 
-- 
2.1.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux