Move GENI SE SPI controller device-tree bindings
from devicetree/bindings/soc/qcom/qcom,geni-se.txt
to devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
Signed-off-by: Dilip Kota <dkota@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/soc/qcom/qcom,geni-se.txt | 27 ++-------------
.../devicetree/bindings/spi/qcom,spi-geni-qcom.txt | 39 ++++++++++++++++++++++
2 files changed, 41 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index 16467ed..f0fbeda 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -53,19 +53,8 @@ Required properties:
- clocks: Serial engine core clock needed by the device.
Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
-
-Required properties:
-- compatible: Must contain "qcom,geni-spi".
-- reg: Must contain SPI register location and length.
-- interrupts: Must contain SPI controller interrupts.
-- clock-names: Must contain "se".
-- clocks: Serial engine core clock needed by the device.
-- #address-cells: Must be <1> to define a chip select address on
- the SPI bus.
-- #size-cells: Must be <0>.
-
-SPI slave nodes must be children of the SPI master node and conform to SPI bus
-binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+node binding is described in
+Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
Example:
geniqup@8c0000 {
@@ -102,16 +91,4 @@ Example:
pinctrl-1 = <&qup_1_uart_3_sleep>;
};
- spi0: spi@a84000 {
- compatible = "qcom,geni-spi";
- reg = <0xa84000 0x4000>;
- interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_1_spi_2_active>;
- pinctrl-1 = <&qup_1_spi_2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
}
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
new file mode 100644
index 0000000..790311a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
@@ -0,0 +1,39 @@
+GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+The QUP v3 core is a GENI based AHB slave that provides a common data path
+(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+mini-core.
+
+SPI in master mode supports up to 50MHz, up to four chip selects, programmable
+data path from 4 bits to 32 bits and numerous protocol variants.
+
+Required properties:
+- compatible: Must contain "qcom,geni-spi".
+- reg: Must contain SPI register location and length.
+- interrupts: Must contain SPI controller interrupts.
+- clock-names: Must contain "se".
+- clocks: Serial engine core clock needed by the device.
+- #address-cells: Must be <1> to define a chip select address on
+ the SPI bus.
+- #size-cells: Must be <0>.
+
+SPI Controller nodes must be child of GENI based Qualcomm Universal
+Peripharal. Please refer GENI based QUP wrapper controller node bindings
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+
+SPI slave nodes must be children of the SPI master node and conform to SPI bus
+binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
+
+Example:
+ spi0: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0xa84000 0x4000>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_spi_2_active>;
+ pinctrl-1 = <&qup_1_spi_2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
