Hi Scott,
Could you please take a look at this patch?
Thanks,
Andy
> -----Original Message-----
> From: andy.tang@xxxxxxx <andy.tang@xxxxxxx>
> Sent: 2018年9月11日 10:12
> To: oss@xxxxxxxxxxxx
> Cc: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> benh@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linuxppc-dev@xxxxxxxxxxxxxxxx; Andy Tang <andy.tang@xxxxxxx>
> Subject: [PATCH] powerpc/mpc85xx: fix issues in clock node
>
> From: Yuantian Tang <andy.tang@xxxxxxx>
>
> The compatible string is not correct in the clock node.
> The clocks property refers to the wrong node too.
> This patch is to fix them.
>
> Signed-off-by: Tang Yuantian <andy.tang@xxxxxxx>
> ---
> arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 8 ++++----
> 1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> index 4908af5..763caf4 100644
> --- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
> @@ -348,7 +348,7 @@
> mux0: mux0@0 {
> #clock-cells = <0>;
> reg = <0x0 4>;
> - compatible = "fsl,core-mux-clock";
> + compatible = "fsl,qoriq-core-mux-2.0";
> clocks = <&pll0 0>, <&pll0 1>;
> clock-names = "pll0_0", "pll0_1";
> clock-output-names = "cmux0";
> @@ -356,9 +356,9 @@
> mux1: mux1@20 {
> #clock-cells = <0>;
> reg = <0x20 4>;
> - compatible = "fsl,core-mux-clock";
> - clocks = <&pll0 0>, <&pll0 1>;
> - clock-names = "pll0_0", "pll0_1";
> + compatible = "fsl,qoriq-core-mux-2.0";
> + clocks = <&pll1 0>, <&pll1 1>;
> + clock-names = "pll1_0", "pll1_1";
> clock-output-names = "cmux1";
> };
> };
> --
> 1.7.1
