On 13/09/2018 at 20:12, Rob Herring wrote:
dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/eeprom@87: I2C bus unit address format error, expected "57" arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/ft5426@56: I2C bus unit address format error, expected "38" arch/arm/boot/dts/at91-vinco.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f8024000/rtc@64: I2C bus unit address format error, expected "32" arch/arm/boot/dts/at91sam9260ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" arch/arm/boot/dts/at91sam9g20ek_2mmc.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" arch/arm/boot/dts/at91sam9g20ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1" arch/arm/boot/dts/at91sam9261ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/tsc2046@0: SPI bus unit address format error, expected "2" Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Looks good to me: Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> Signed-off-by: Rob Herring <robh@xxxxxxxxxx> --- Please apply to the sub-arch tree. The dtc changes haven't landed, but will for 4.20. arch/arm/boot/dts/at91-dvk_su60_somc.dtsi | 4 ++-- arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 4 ++-- arch/arm/boot/dts/at91-vinco.dts | 2 +- arch/arm/boot/dts/at91sam9260ek.dts | 2 +- arch/arm/boot/dts/at91sam9261ek.dts | 2 +- arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi index bb86f17ed5ed..21876da7c442 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -70,9 +70,9 @@ &i2c1 { status = "okay";- eeprom@87 {+ eeprom@57 { compatible = "giantec,gt24c32a", "atmel,24c32"; - reg = <87>; + reg = <0x57>; pagesize = <32>; }; }; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi index 4b9176dc5d02..df0f0cc575c1 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -59,9 +59,9 @@ &i2c1 { status = "okay";- ft5426@56 {+ ft5426@38 { compatible = "focaltech,ft5426", "edt,edt-ft5406"; - reg = <56>; + reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_ctp_int>;diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dtsindex 1be9889a2b3a..430277291e02 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -128,7 +128,7 @@ i2c2: i2c@f8024000 { status = "okay";- rtc1: rtc@64 {+ rtc1: rtc@32 { compatible = "epson,rx8900"; reg = <0x32>; }; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index d2b865f60293..07d1b571e601 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -127,7 +127,7 @@spi0: spi@fffc8000 {cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index a29fc0494076..a57f2d435dca 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -160,7 +160,7 @@ spi-max-frequency = <15000000>; };- tsc2046@0 {+ tsc2046@2 { reg = <2>; compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 71df3adfc7ca..ec1f17ab6753 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -109,7 +109,7 @@spi0: spi@fffc8000 {cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>;
-- Nicolas Ferre
