Re: [PATCH v3 1/2] dt-binding: remoteproc: Add QTI ADSP PIL bindings

[Rohit Kumar <rohitkr@xxxxxxxxxxxxxx>]

Thanks Rob for reviewing.


On 9/11/2018 1:31 AM, Rob Herring wrote:
> On Mon, Sep 03, 2018 at 05:22:39PM +0530, Rohit kumar wrote:
> > Add devicetree bindings documentation file for Qualcomm
> > Technolgies Inc ADSP Peripheral Image Loader.
> >
> > Signed-off-by: Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
> > ---
> >   .../bindings/remoteproc/qcom,adsp-pil.txt          | 123 +++++++++++++++++++++
> >   1 file changed, 123 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
> >
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
> > new file mode 100644
> > index 0000000..f1c215a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
> > @@ -0,0 +1,123 @@
> > +Qualcomm Technology Inc. ADSP Peripheral Image Loader
> > +
> > +This document defines the binding for a component that loads and boots firmware
> > +on the Qualcomm Technology Inc. ADSP Hexagon core.
> > +
> > +- compatible:
> > +	Usage: required
> > +	Value type: <string>
> > +	Definition: must be one of:
> > +		    "qcom,sdm845-adsp-pil"
> > +
> > +- reg:
> > +	Usage: required
> > +	Value type: <prop-encoded-array>
> > +	Definition: must specify the base address and size of the qdsp6ss register
> > +
> > +- interrupts-extended:
> > +	Usage: required
> > +	Value type: <prop-encoded-array>
> > +	Definition: must list the watchdog, fatal IRQs ready, handover and
> > +		    stop-ack IRQs
> > +
> > +- interrupt-names:
> > +	Usage: required
> > +	Value type: <stringlist>
> > +	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
> > +
> > +- clocks:
> > +	Usage: required
> > +	Value type: <prop-encoded-array>
> > +	Definition:  List of phandle and clock specifier pairs
> How many clocks?
>
> > +
> > +- clock-names:
> > +	Usage: required
> > +	Value type: <stringlist>
> > +	Definition: List of clock input name strings sorted in the same
> > +				order as the clocks property.
> What are the names?

I will update these in next spin.
> > +
> > +- power-domains:
> > +	Usage: required
> > +	Value type: <phandle>
> > +	Definition: reference to cx power domain node.
> > +
> > +- resets:
> > +	Usage: required
> > +	Value type: <phandle>
> > +	Definition: reference to the reset-controller for the lpass
> How many?
>
> > +
> > +- reset-names:
> > +        Usage: required
> > +        Value type: <stringlist>
> > +        Definition: must be "pdc_sync" and "cc_lpass"
> > +
> > +- qcom,halt-regs:
> > +	Usage: required
> > +	Value type: <prop-encoded-array>
> > +	Definition: a phandle reference to a syscon representing TCSR followed
> > +			by the offset within syscon for lpass halt register.
> > +
> > +- memory-region:
> > +	Usage: required
> > +	Value type: <phandle>
> > +	Definition: reference to the reserved-memory for the ADSP
> > +
> > +- qcom,smem-states:
> > +	Usage: required
> > +	Value type: <phandle>
> > +	Definition: reference to the smem state for requesting the ADSP to
> > +		    shut down
> > +
> > +- qcom,smem-state-names:
> > +	Usage: required
> > +	Value type: <stringlist>
> > +	Definition: must be "stop"
> > +
> > +
> > += SUBNODES
> > +The adsp node may have an subnode named "glink-edge" that describes the
> > +communication edge, channels and devices related to the ADSP.
> > +See ../soc/qcom/qcom,glink.txt for details on how to describe these.
> > +
> > += EXAMPLE
> > +The following example describes the resources needed to boot control the
> > +ADSP, as it is found on SDM845 boards.
> > +	adsp-pil {
> > +		compatible = "qcom,sdm845-adsp-pil";
> > +
> > +		reg = <0x17300000 0x40c>;
> > +
> > +		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
> > +			<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> > +			<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> > +			<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> > +			<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> > +		interrupt-names = "wdog", "fatal", "ready",
> > +			"handover", "stop-ack";
> > +
> > +		clocks = <&rpmhcc RPMH_CXO_CLK>,
> > +			<&gcc GCC_LPASS_SWAY_CLK>,
> > +			<&lpasscc LPASS_AUDIO_WRAPPER_AON_CLK>,
> > +			<&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> > +			<&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> > +			<&lpasscc LPASS_QDSP6SS_XO_CLK>,
> > +			<&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> > +			<&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> > +		clock-names = "xo", "sway_cbcr", "lpass_aon",
> > +			"lpass_ahbs_aon_cbcr",
> > +			"lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> > +			"qdsp6ss_sleep", "qdsp6ss_core";
> > +
> > +		power-domains = <&rpmhpd SDM845_CX>;
> > +
> > +		resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> > +			 <&aoss_reset AOSS_CC_LPASS_RESTART>;
> > +		reset-names = "pdc_sync", "cc_lpass";
> > +
> > +		qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> > +
> > +		memory-region = <&pil_adsp_mem>;
> > +
> > +		qcom,smem-states = <&adsp_smp2p_out 0>;
> > +		qcom,smem-state-names = "stop";
> > +	};
> > --
> > Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> > is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Thanks,
Rohit