Add device-tree binding that describes CPU frequency-scaling hardware
found on NVIDIA Tegra20/30 SoC's.
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
.../cpufreq/nvidia,tegra20-cpufreq.txt | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
new file mode 100644
index 000000000000..2c51f676e958
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
@@ -0,0 +1,38 @@
+Binding for NVIDIA Tegra20 CPUFreq
+==================================
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - pll_x: main-parent for CPU clock, must be the first entry
+ - backup: intermediate-parent for CPU clock
+ - cpu: the CPU clock
+- operating-points-v2: See ../bindings/opp/opp.txt for details.
+- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details.
+
+Example:
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ opp@216000000 {
+ clock-latency-ns = <300000>;
+ opp-hz = /bits/ 64 <216000000>;
+ opp-microvolt = <7500000>;
+ opp-suspend;
+ };
+
+ ...
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ clocks = <&tegra_car TEGRA20_CLK_PLL_X>,
+ <&tegra_car TEGRA20_CLK_PLL_P>,
+ <&tegra_car TEGRA20_CLK_CCLK>;
+ clock-names = "pll_x", "backup", "cpu";
+ operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
+ };
+ };
--
2.18.0
