Hello This patchset add support for allwinner R40 AHCI controller. The whole patchset is tested on sun8i-r40-bananapi-m2-ultra and on sun7i-a20-cubieboard2 which doesnt have any of the ressources added by this serie, so no regression should come with it. The last patch(ata: ahci_sunxi: remove PHY code) should not be merged, but will be resent for inclustion when all patchs will have hit linus tree. Changes since v3: - Moved PHY code to a new sun4i-a10-phy-sata driver - Removed reset code since ahci_platform support now reset controller. Changes since V2 - Moved all ressources management to ahci_platform Corentin Labbe (13): dt-bindings: ata: ahci-platform: fix indentation of target-supply ata: ahci_platform: add support for AHCI controller regulator dt-bindings: ata: ahci-platform: document ahci-supply phy: Add sun4i-a10-phy-sata driver dt-bindings: phy: document sun4i-a10-sata-phy dt-bindings: ata: update ahci_sunxi bindings ata: ahci_sunxi: Bypass PHY init when using the new binding ata: ahci_sunxi: add support for r40 ARM: dts: sun8i: r40: add sata node ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI ARM: dts: sun7i: a20: add sata-port/sata-phy nodes ARM: dts: sun4i: a10: add sata-port/sata-phy nodes ata: ahci_sunxi: remove PHY code .../devicetree/bindings/ata/ahci-platform.txt | 11 +- .../devicetree/bindings/phy/sun4i-sata-phy.txt | 20 ++ arch/arm/boot/dts/sun4i-a10.dtsi | 13 ++ arch/arm/boot/dts/sun7i-a20.dtsi | 13 ++ arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 21 +++ arch/arm/boot/dts/sun8i-r40.dtsi | 23 +++ drivers/ata/ahci.h | 1 + drivers/ata/ahci_sunxi.c | 87 +-------- drivers/ata/libahci_platform.c | 26 ++- drivers/phy/allwinner/Kconfig | 7 + drivers/phy/allwinner/Makefile | 1 + drivers/phy/allwinner/phy-sun4i-sata.c | 208 +++++++++++++++++++++ 12 files changed, 343 insertions(+), 88 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/sun4i-sata-phy.txt create mode 100644 drivers/phy/allwinner/phy-sun4i-sata.c -- 2.16.4
