Hello Sébastien,
Am 30.08.2018 um 15:25 schrieb Sébastien Szymanski:
Hi,
On 08/30/2018 02:47 PM, Heiko Schocher wrote:
on the imx6ull the input_val for uart5 rx function
of pin MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
is 7 and not 5 as on the imx6ul. With this
patch, console on an imx6ull based board works
with uart5.
Signed-off-by: Heiko Schocher <hs@xxxxxxx>
This is already fixed on v4.19-rc1 and also on a few others PADs that
have similar issue.
Moreover signals common for both i.MX6UL and i.MX6ULL should have
IMX6UL_ as prefix:
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=for-next&id=387301d5b88e2fe91de9baf4ca25f771cc633f70
My patch was based on current HEAD ...Ah, got it, this patch is in
"for-next"
Thanks! And sorry for the noise.
bye,
Heiko
Regards,
---
arch/arm/boot/dts/imx6ull-pinfunc.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
index fdc46bb09cc1a..d835aeae5485b 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -61,5 +61,6 @@
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0 7
#endif /* __DTS_IMX6ULL_PINFUNC_H */
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs@xxxxxxx
