Hi, On 08/30/2018 02:47 PM, Heiko Schocher wrote: > on the imx6ull the input_val for uart5 rx function > of pin MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX > is 7 and not 5 as on the imx6ul. With this > patch, console on an imx6ull based board works > with uart5. > > Signed-off-by: Heiko Schocher <hs@xxxxxxx> This is already fixed on v4.19-rc1 and also on a few others PADs that have similar issue. Moreover signals common for both i.MX6UL and i.MX6ULL should have IMX6UL_ as prefix: https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=for-next&id=387301d5b88e2fe91de9baf4ca25f771cc633f70 Regards, > > --- > > arch/arm/boot/dts/imx6ull-pinfunc.h | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h > index fdc46bb09cc1a..d835aeae5485b 100644 > --- a/arch/arm/boot/dts/imx6ull-pinfunc.h > +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h > @@ -61,5 +61,6 @@ > #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 > #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 > #define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 > +#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0 7 > > #endif /* __DTS_IMX6ULL_PINFUNC_H */ > -- Sébastien Szymanski Software engineer, Armadeus Systems Tel: +33 (0)9 72 29 41 44 Fax: +33 (0)9 72 28 79 26
