[PATCH 2/8] regulator: Support ROHM BD71847 power management IC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



BD71847 is reduced version of BD71837. DVS bucks 3 and 4 are
removed as is LDO7. Voltage ranges of some regulators are
expanded.

Add initial support for BD71847 with BD71847 driver.

Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
---
 drivers/mfd/rohm-bd718x7.c            |   84 ++-
 drivers/regulator/bd71837-regulator.c | 1056 ++++++++++++++++++++++-----------
 include/linux/mfd/rohm-bd718x7.h      |  272 ++++-----
 3 files changed, 910 insertions(+), 502 deletions(-)

diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index 75c8ec659547..c95f34269bb6 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -7,21 +7,34 @@
 // Datasheet available from
 // https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
 
+#include <linux/gpio_keys.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/rohm-bd718x7.h>
 #include <linux/mfd/core.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/regmap.h>
 
-/*
- * gpio_keys.h requires definiton of bool. It is brought in
- * by above includes. Keep this as last until gpio_keys.h gets fixed.
- */
-#include <linux/gpio_keys.h>
+static const u8 bd71837_supported_revisions[] = { 0xA2 };
+static const u8 bd71847_supported_revisions[] = { 0xA0 };
 
-static const u8 supported_revisions[] = { 0xA2 /* BD71837 */ };
+struct known_revisions {
+	const u8 (*revisions)[];
+	unsigned int known_revisions;
+};
+
+static const struct known_revisions supported_revisions[BD718XX_TYPE_AMNT] = {
+	[BD718XX_TYPE_BD71837] = {
+		.revisions = &bd71837_supported_revisions,
+		.known_revisions = ARRAY_SIZE(bd71837_supported_revisions),
+	},
+	[BD718XX_TYPE_BD71847] = {
+		.revisions = &bd71847_supported_revisions,
+		.known_revisions = ARRAY_SIZE(bd71847_supported_revisions),
+	},
+};
 
 static struct gpio_keys_button button = {
 	.code = KEY_POWER,
@@ -41,8 +54,8 @@ static struct mfd_cell bd71837_mfd_cells[] = {
 		.platform_data = &bd718xx_powerkey_data,
 		.pdata_size = sizeof(bd718xx_powerkey_data),
 	},
-	{ .name = "bd71837-clk", },
-	{ .name = "bd71837-pmic", },
+	{ .name = "bd718xx-clk", },
+	{ .name = "bd718xx-pmic", },
 };
 
 static const struct regmap_irq bd71837_irqs[] = {
@@ -61,16 +74,16 @@ static struct regmap_irq_chip bd71837_irq_chip = {
 	.num_irqs = ARRAY_SIZE(bd71837_irqs),
 	.num_regs = 1,
 	.irq_reg_stride = 1,
-	.status_base = BD71837_REG_IRQ,
-	.mask_base = BD71837_REG_MIRQ,
-	.ack_base = BD71837_REG_IRQ,
+	.status_base = BD718XX_REG_IRQ,
+	.mask_base = BD718XX_REG_MIRQ,
+	.ack_base = BD718XX_REG_IRQ,
 	.init_ack_masked = true,
 	.mask_invert = false,
 };
 
 static const struct regmap_range pmic_status_range = {
-	.range_min = BD71837_REG_IRQ,
-	.range_max = BD71837_REG_POW_STATE,
+	.range_min = BD718XX_REG_IRQ,
+	.range_max = BD718XX_REG_POW_STATE,
 };
 
 static const struct regmap_access_table volatile_regs = {
@@ -82,7 +95,7 @@ static const struct regmap_config bd71837_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.volatile_table = &volatile_regs,
-	.max_register = BD71837_MAX_REGISTER - 1,
+	.max_register = BD718XX_MAX_REGISTER - 1,
 	.cache_type = REGCACHE_RBTREE,
 };
 
@@ -91,13 +104,19 @@ static int bd71837_i2c_probe(struct i2c_client *i2c,
 {
 	struct bd71837 *bd71837;
 	int ret, i;
-	unsigned int val;
+	const unsigned int *type;
 
 	bd71837 = devm_kzalloc(&i2c->dev, sizeof(struct bd71837), GFP_KERNEL);
 
 	if (!bd71837)
 		return -ENOMEM;
 
+	type = of_device_get_match_data(&i2c->dev);
+	if (!type || *type >= BD718XX_TYPE_AMNT) {
+		dev_err(&i2c->dev, "Bad chip type\n");
+		return -ENODEV;
+	}
+
 	bd71837->chip_irq = i2c->irq;
 
 	if (!bd71837->chip_irq) {
@@ -105,6 +124,7 @@ static int bd71837_i2c_probe(struct i2c_client *i2c,
 		return -EINVAL;
 	}
 
+	bd71837->chip_type = *type;
 	bd71837->dev = &i2c->dev;
 	dev_set_drvdata(&i2c->dev, bd71837);
 
@@ -114,18 +134,21 @@ static int bd71837_i2c_probe(struct i2c_client *i2c,
 		return PTR_ERR(bd71837->regmap);
 	}
 
-	ret = regmap_read(bd71837->regmap, BD71837_REG_REV, &val);
+	ret = regmap_read(bd71837->regmap, BD718XX_REG_REV, &bd71837->chip_rev);
 	if (ret) {
-		dev_err(&i2c->dev, "Read BD71837_REG_DEVICE failed\n");
+		dev_err(&i2c->dev, "Failed to read revision register\n");
 		return ret;
 	}
-	for (i = 0; i < ARRAY_SIZE(supported_revisions); i++)
-		if (supported_revisions[i] == val)
+	for (i = 0;
+	     i < supported_revisions[bd71837->chip_type].known_revisions; i++)
+		if ((*supported_revisions[bd71837->chip_type].revisions)[i] ==
+		    bd71837->chip_rev)
 			break;
 
-	if (i == ARRAY_SIZE(supported_revisions)) {
-		dev_err(&i2c->dev, "Unsupported chip revision\n");
-		return -ENODEV;
+	if (i == supported_revisions[bd71837->chip_type].known_revisions) {
+		dev_err(&i2c->dev, "Unrecognized revision 0x%02x\n",
+			bd71837->chip_rev);
+		return -EINVAL;
 	}
 
 	ret = devm_regmap_add_irq_chip(&i2c->dev, bd71837->regmap,
@@ -138,7 +161,7 @@ static int bd71837_i2c_probe(struct i2c_client *i2c,
 
 	/* Configure short press to 10 milliseconds */
 	ret = regmap_update_bits(bd71837->regmap,
-				 BD71837_REG_PWRONCONFIG0,
+				 BD718XX_REG_PWRONCONFIG0,
 				 BD718XX_PWRBTN_PRESS_DURATION_MASK,
 				 BD718XX_PWRBTN_SHORT_PRESS_10MS);
 	if (ret) {
@@ -149,7 +172,7 @@ static int bd71837_i2c_probe(struct i2c_client *i2c,
 
 	/* Configure long press to 10 seconds */
 	ret = regmap_update_bits(bd71837->regmap,
-				 BD71837_REG_PWRONCONFIG1,
+				 BD718XX_REG_PWRONCONFIG1,
 				 BD718XX_PWRBTN_PRESS_DURATION_MASK,
 				 BD718XX_PWRBTN_LONG_PRESS_10S);
 
@@ -177,9 +200,20 @@ static int bd71837_i2c_probe(struct i2c_client *i2c,
 
 	return ret;
 }
+static const unsigned int chip_types[] = {
+	[BD718XX_TYPE_BD71837] = BD718XX_TYPE_BD71837,
+	[BD718XX_TYPE_BD71847] = BD718XX_TYPE_BD71847,
+};
 
 static const struct of_device_id bd71837_of_match[] = {
-	{ .compatible = "rohm,bd71837", },
+	{
+		.compatible = "rohm,bd71837",
+		.data = &chip_types[BD718XX_TYPE_BD71837]
+	},
+	{
+		.compatible = "rohm,bd71847",
+		.data = &chip_types[BD718XX_TYPE_BD71847]
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, bd71837_of_match);
diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c
index a1bd8aaf4d98..49f75258aa20 100644
--- a/drivers/regulator/bd71837-regulator.c
+++ b/drivers/regulator/bd71837-regulator.c
@@ -15,11 +15,11 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/slab.h>
 
-struct bd71837_pmic {
-	struct regulator_desc descs[BD71837_REGULATOR_CNT];
+struct bd718xx_pmic {
+	struct bd718xx_regulator_data *rdata;
 	struct bd71837 *mfd;
 	struct platform_device *pdev;
-	struct regulator_dev *rdev[BD71837_REGULATOR_CNT];
+	struct regulator_dev *rdev[BD718XX_REGULATOR_MAX];
 };
 
 /*
@@ -33,7 +33,7 @@ struct bd71837_pmic {
 static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
 					   int ramp_delay)
 {
-	struct bd71837_pmic *pmic = rdev_get_drvdata(rdev);
+	struct bd718xx_pmic *pmic = rdev_get_drvdata(rdev);
 	struct bd71837 *mfd = pmic->mfd;
 	int id = rdev->desc->id;
 	unsigned int ramp_value = BUCK_RAMPRATE_10P00MV;
@@ -60,7 +60,7 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
 			rdev->desc->name, ramp_delay);
 	}
 
-	return regmap_update_bits(mfd->regmap, BD71837_REG_BUCK1_CTRL + id,
+	return regmap_update_bits(mfd->regmap, BD718XX_REG_BUCK1_CTRL + id,
 				  BUCK_RAMPRATE_MASK, ramp_value << 6);
 }
 
@@ -69,7 +69,7 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
  * is changed. Hence we return -EBUSY for these if voltage is changed
  * when BUCK/LDO is enabled.
  */
-static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
+static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev,
 						    unsigned int sel)
 {
 	if (regulator_is_enabled_regmap(rdev))
@@ -78,45 +78,45 @@ static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
 	return regulator_set_voltage_sel_regmap(rdev, sel);
 }
 
-static struct regulator_ops bd71837_ldo_regulator_ops = {
+static struct regulator_ops bd718xx_ldo_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static struct regulator_ops bd71837_ldo_regulator_nolinear_ops = {
+static struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_table,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static struct regulator_ops bd71837_buck_regulator_ops = {
+static struct regulator_ops bd718xx_buck_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 };
 
-static struct regulator_ops bd71837_buck_regulator_nolinear_ops = {
+static struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_table,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_time_sel = regulator_set_voltage_time_sel,
 };
 
-static struct regulator_ops bd71837_buck1234_regulator_ops = {
+static struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
@@ -128,24 +128,30 @@ static struct regulator_ops bd71837_buck1234_regulator_ops = {
 };
 
 /*
- * BUCK1/2/3/4
+ * BD71837 BUCK1/2/3/4
+ * BD71847 BUCK1/2
  * 0.70 to 1.30V (10mV step)
  */
-static const struct regulator_linear_range bd71837_buck1234_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
 	REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
 };
 
 /*
- * BUCK5
- * 0.9V to 1.35V ()
+ * BD71837 BUCK5
+ * BD71847 BUCK3
+ * 0.7V to 1.35V ()
  */
-static const struct regulator_linear_range bd71837_buck5_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_1st_nodvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
 	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
 	REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
 };
 
+static const struct regulator_linear_range bd71847_buck4_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
+};
+
 /*
  * BUCK6
  * 3.0V to 3.3V (step 100mV)
@@ -155,7 +161,8 @@ static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = {
 };
 
 /*
- * BUCK7
+ * BD71837 BUCK7
+ * BD71847 BUCK5
  * 000 = 1.605V
  * 001 = 1.695V
  * 010 = 1.755V
@@ -165,7 +172,7 @@ static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = {
  * 110 = 1.95V
  * 111 = 1.995V
  */
-static const unsigned int buck_7_volts[] = {
+static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = {
 	1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000
 };
 
@@ -173,16 +180,15 @@ static const unsigned int buck_7_volts[] = {
  * BUCK8
  * 0.8V to 1.40V (step 10mV)
  */
-static const struct regulator_linear_range bd71837_buck8_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
-	REGULATOR_LINEAR_RANGE(1400000, 0x3D, 0x3F, 0),
 };
 
 /*
  * LDO1
  * 3.0 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_ldo1_volts[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
 };
 
@@ -198,7 +204,7 @@ static const unsigned int ldo_2_volts[] = {
  * LDO3
  * 1.8 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_ldo3_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };
 
@@ -206,16 +212,15 @@ static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = {
  * LDO4
  * 0.9 to 1.8V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo4_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_ldo4_volts[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
-	REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
 };
 
 /*
- * LDO5
+ * LDO5 for BD71837
  * 1.8 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_ldo5_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };
 
@@ -223,331 +228,722 @@ static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = {
  * LDO6
  * 0.9 to 1.8V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo6_voltage_ranges[] = {
+static const struct regulator_linear_range bd718xx_ldo6_volts[] = {
 	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
-	REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
 };
 
 /*
  * LDO7
  * 1.8 to 3.3V (100mV step)
  */
-static const struct regulator_linear_range bd71837_ldo7_voltage_ranges[] = {
+static const struct regulator_linear_range bd71837_ldo7_volts[] = {
 	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
 };
 
-static const struct regulator_desc bd71837_regulators[] = {
+struct reg_init {
+	unsigned int reg;
+	unsigned int mask;
+	unsigned int val;
+};
+struct bd718xx_regulator_data {
+	struct regulator_desc desc;
+	const struct reg_init init;
+	const struct reg_init *additional_inits;
+	int additional_init_amnt;
+};
+
+/*
+ * There is a HW quirk in BD71837. The shutdown sequence timings for
+ * bucks/LDOs which are controlled via register interface are changed.
+ * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the
+ * beginning of shut-down sequence. As bucks 6 and 7 are parent
+ * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage
+ * monitoring to errorneously detect under voltage and force PMIC to
+ * emergency state instead of poweroff. In order to avoid this we
+ * disable voltage monitoring for LDO5 and LDO6
+ */
+static const struct reg_init bd71837_ldo5_inits[] = {
+	{
+		.reg = BD718XX_REG_MVRFLTMASK2,
+		.mask = BD718XX_LDO5_VRMON80,
+		.val = BD718XX_LDO5_VRMON80,
+	},
+};
+
+static const struct reg_init bd71837_ldo6_inits[] = {
+	{
+		.reg = BD718XX_REG_MVRFLTMASK2,
+		.mask = BD718XX_LDO6_VRMON80,
+		.val = BD718XX_LDO6_VRMON80,
+	},
+};
+
+static const struct bd718xx_regulator_data bd71847_regulators[] = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("BUCK1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK1,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK1_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK1_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
 	{
-		.name = "buck1",
-		.of_match = of_match_ptr("BUCK1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK1,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK1_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK1_VOLT_RUN,
-		.vsel_mask = BUCK1_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK1_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("BUCK2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK2,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK2_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK2_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "buck2",
-		.of_match = of_match_ptr("BUCK2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK2,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK2_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK2_VOLT_RUN,
-		.vsel_mask = BUCK2_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK2_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck3",
+			.of_match = of_match_ptr("BUCK3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK3,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_1ST_NODVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_1st_nodvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_1st_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_1ST_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "buck3",
-		.of_match = of_match_ptr("BUCK3"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK3,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK3_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK3_VOLT_RUN,
-		.vsel_mask = BUCK3_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK3_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck4",
+			.of_match = of_match_ptr("BUCK4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK4,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71847_BUCK4_VOLTAGE_NUM,
+			.linear_ranges = bd71847_buck4_voltage_ranges,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd71847_buck4_voltage_ranges),
+			.enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
+			.vsel_mask = BD71847_BUCK4_MASK,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "buck4",
-		.of_match = of_match_ptr("BUCK4"),
-		.regulators_node = of_match_ptr("regulators"),
-			.id = BD71837_BUCK4,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK4_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK4_VOLT_RUN,
-		.vsel_mask = BUCK4_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK4_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck5",
+			.of_match = of_match_ptr("BUCK5"),
+				.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK5,
+			.ops = &bd718xx_buck_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
+			.n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "buck5",
-		.of_match = of_match_ptr("BUCK5"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK5,
-		.ops = &bd71837_buck_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck5_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck5_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK5_VOLT,
-		.vsel_mask = BUCK5_MASK,
-		.enable_reg = BD71837_REG_BUCK5_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck6",
+			.of_match = of_match_ptr("BUCK6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK6,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_4TH_NODVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_4th_nodvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "buck6",
-		.of_match = of_match_ptr("BUCK6"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK6,
-		.ops = &bd71837_buck_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck6_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck6_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK6_VOLT,
-		.vsel_mask = BUCK6_MASK,
-		.enable_reg = BD71837_REG_BUCK6_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "ldo1",
+			.of_match = of_match_ptr("LDO1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO1,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO1_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo1_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts),
+			.vsel_reg = BD718XX_REG_LDO1_VOLT,
+			.vsel_mask = BD718XX_LDO1_MASK,
+			.enable_reg = BD718XX_REG_LDO1_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO1_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
 	},
 	{
-		.name = "buck7",
-		.of_match = of_match_ptr("BUCK7"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK7,
-		.ops = &bd71837_buck_regulator_nolinear_ops,
-		.type = REGULATOR_VOLTAGE,
-		.volt_table = &buck_7_volts[0],
-		.n_voltages = ARRAY_SIZE(buck_7_volts),
-		.vsel_reg = BD71837_REG_BUCK7_VOLT,
-		.vsel_mask = BUCK7_MASK,
-		.enable_reg = BD71837_REG_BUCK7_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "ldo2",
+			.of_match = of_match_ptr("LDO2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO2,
+			.ops = &bd718xx_ldo_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &ldo_2_volts[0],
+			.vsel_reg = BD718XX_REG_LDO2_VOLT,
+			.vsel_mask = BD718XX_LDO2_MASK,
+			.n_voltages = ARRAY_SIZE(ldo_2_volts),
+			.enable_reg = BD718XX_REG_LDO2_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO2_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
 	},
 	{
-		.name = "buck8",
-		.of_match = of_match_ptr("BUCK8"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK8,
-		.ops = &bd71837_buck_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK8_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck8_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck8_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK8_VOLT,
-		.vsel_mask = BUCK8_MASK,
-		.enable_reg = BD71837_REG_BUCK8_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "ldo3",
+			.of_match = of_match_ptr("LDO3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO3,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO3_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo3_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts),
+			.vsel_reg = BD718XX_REG_LDO3_VOLT,
+			.vsel_mask = BD718XX_LDO3_MASK,
+			.enable_reg = BD718XX_REG_LDO3_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO3_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
 	},
 	{
-		.name = "ldo1",
-		.of_match = of_match_ptr("LDO1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO1,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO1_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo1_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo1_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO1_VOLT,
-		.vsel_mask = LDO1_MASK,
-		.enable_reg = BD71837_REG_LDO1_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "ldo4",
+			.of_match = of_match_ptr("LDO4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO4,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO4_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo4_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts),
+			.vsel_reg = BD718XX_REG_LDO4_VOLT,
+			.vsel_mask = BD718XX_LDO4_MASK,
+			.enable_reg = BD718XX_REG_LDO4_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO4_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
 	},
 	{
-		.name = "ldo2",
-		.of_match = of_match_ptr("LDO2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO2,
-		.ops = &bd71837_ldo_regulator_nolinear_ops,
-		.type = REGULATOR_VOLTAGE,
-		.volt_table = &ldo_2_volts[0],
-		.vsel_reg = BD71837_REG_LDO2_VOLT,
-		.vsel_mask = LDO2_MASK,
-		.n_voltages = ARRAY_SIZE(ldo_2_volts),
-		.n_voltages = BD71837_LDO2_VOLTAGE_NUM,
-		.enable_reg = BD71837_REG_LDO2_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "ldo5",
+			.of_match = of_match_ptr("LDO5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO5,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO5_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo5_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo5_volts),
+			.vsel_reg = BD718XX_REG_LDO5_VOLT,
+			.vsel_mask = BD71847_LDO5_MASK,
+			.enable_reg = BD718XX_REG_LDO5_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO5_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
 	},
 	{
-		.name = "ldo3",
-		.of_match = of_match_ptr("LDO3"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO3,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO3_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo3_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo3_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO3_VOLT,
-		.vsel_mask = LDO3_MASK,
-		.enable_reg = BD71837_REG_LDO3_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "ldo6",
+			.of_match = of_match_ptr("LDO6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO6,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO6_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo6_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts),
+			/* LDO6 is supplied by buck5 */
+			.supply_name = "buck5",
+			.vsel_reg = BD718XX_REG_LDO6_VOLT,
+			.vsel_mask = BD718XX_LDO6_MASK,
+			.enable_reg = BD718XX_REG_LDO6_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO6_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+};
+
+static const struct bd718xx_regulator_data bd71837_regulators[] = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("BUCK1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK1,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK1_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK1_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("BUCK2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK2,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK2_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK2_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck3",
+			.of_match = of_match_ptr("BUCK3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK3,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD71837_REG_BUCK3_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD71837_REG_BUCK3_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD71837_REG_BUCK3_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck4",
+			.of_match = of_match_ptr("BUCK4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK4,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD71837_REG_BUCK4_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD71837_REG_BUCK4_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD71837_REG_BUCK4_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "ldo4",
-		.of_match = of_match_ptr("LDO4"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO4,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO4_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo4_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo4_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO4_VOLT,
-		.vsel_mask = LDO4_MASK,
-		.enable_reg = BD71837_REG_LDO4_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck5",
+			.of_match = of_match_ptr("BUCK5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK5,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_1ST_NODVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_1st_nodvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_1st_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_1ST_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "ldo5",
-		.of_match = of_match_ptr("LDO5"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO5,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO5_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo5_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_voltage_ranges),
-		/* LDO5 is supplied by buck6 */
-		.supply_name = "buck6",
-		.vsel_reg = BD71837_REG_LDO5_VOLT,
-		.vsel_mask = LDO5_MASK,
-		.enable_reg = BD71837_REG_LDO5_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck6",
+			.of_match = of_match_ptr("BUCK6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK6,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
+			.linear_ranges = bd71837_buck6_voltage_ranges,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd71837_buck6_voltage_ranges),
+			.vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
+			.vsel_mask = BD71837_BUCK6_MASK,
+			.enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "ldo6",
-		.of_match = of_match_ptr("LDO6"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO6,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO6_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo6_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo6_voltage_ranges),
-		/* LDO6 is supplied by buck7 */
-		.supply_name = "buck7",
-		.vsel_reg = BD71837_REG_LDO6_VOLT,
-		.vsel_mask = LDO6_MASK,
-		.enable_reg = BD71837_REG_LDO6_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck7",
+			.of_match = of_match_ptr("BUCK7"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK7,
+			.ops = &bd718xx_buck_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
+			.n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
 	},
 	{
-		.name = "ldo7",
-		.of_match = of_match_ptr("LDO7"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO7,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO7_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo7_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO7_VOLT,
-		.vsel_mask = LDO7_MASK,
-		.enable_reg = BD71837_REG_LDO7_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
+		.desc = {
+			.name = "buck8",
+			.of_match = of_match_ptr("BUCK8"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK8,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_4TH_NODVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_4th_nodvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo1",
+			.of_match = of_match_ptr("LDO1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO1,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO1_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo1_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts),
+			.vsel_reg = BD718XX_REG_LDO1_VOLT,
+			.vsel_mask = BD718XX_LDO1_MASK,
+			.enable_reg = BD718XX_REG_LDO1_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO1_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo2",
+			.of_match = of_match_ptr("LDO2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO2,
+			.ops = &bd718xx_ldo_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &ldo_2_volts[0],
+			.vsel_reg = BD718XX_REG_LDO2_VOLT,
+			.vsel_mask = BD718XX_LDO2_MASK,
+			.n_voltages = ARRAY_SIZE(ldo_2_volts),
+			.enable_reg = BD718XX_REG_LDO2_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO2_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo3",
+			.of_match = of_match_ptr("LDO3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO3,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO3_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo3_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts),
+			.vsel_reg = BD718XX_REG_LDO3_VOLT,
+			.vsel_mask = BD718XX_LDO3_MASK,
+			.enable_reg = BD718XX_REG_LDO3_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO3_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo4",
+			.of_match = of_match_ptr("LDO4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO4,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO4_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo4_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts),
+			.vsel_reg = BD718XX_REG_LDO4_VOLT,
+			.vsel_mask = BD718XX_LDO4_MASK,
+			.enable_reg = BD718XX_REG_LDO4_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO4_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo5",
+			.of_match = of_match_ptr("LDO5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO5,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO5_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo5_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo5_volts),
+			/* LDO5 is supplied by buck6 */
+			.supply_name = "buck6",
+			.vsel_reg = BD718XX_REG_LDO5_VOLT,
+			.vsel_mask = BD71837_LDO5_MASK,
+			.enable_reg = BD718XX_REG_LDO5_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO5_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+		.additional_inits = bd71837_ldo5_inits,
+		.additional_init_amnt = ARRAY_SIZE(bd71837_ldo5_inits),
+	},
+	{
+		.desc = {
+			.name = "ldo6",
+			.of_match = of_match_ptr("LDO6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO6,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO6_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo6_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts),
+			/* LDO6 is supplied by buck7 */
+			.supply_name = "buck7",
+			.vsel_reg = BD718XX_REG_LDO6_VOLT,
+			.vsel_mask = BD718XX_LDO6_MASK,
+			.enable_reg = BD718XX_REG_LDO6_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO6_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+		.additional_inits = bd71837_ldo6_inits,
+		.additional_init_amnt = ARRAY_SIZE(bd71837_ldo6_inits),
+	},
+	{
+		.desc = {
+			.name = "ldo7",
+			.of_match = of_match_ptr("LDO7"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO7,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_LDO7_VOLTAGE_NUM,
+			.linear_ranges = bd71837_ldo7_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_volts),
+			.vsel_reg = BD71837_REG_LDO7_VOLT,
+			.vsel_mask = BD71837_LDO7_MASK,
+			.enable_reg = BD71837_REG_LDO7_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD71837_REG_LDO7_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
 	},
 };
 
-struct reg_init {
-	unsigned int reg;
-	unsigned int mask;
+struct bd718xx_pmic_inits {
+	const struct bd718xx_regulator_data (*r_datas)[];
+	unsigned int r_amount;
 };
 
 static int bd71837_probe(struct platform_device *pdev)
 {
-	struct bd71837_pmic *pmic;
+	struct bd718xx_pmic *pmic;
 	struct regulator_config config = { 0 };
-	struct reg_init pmic_regulator_inits[] = {
-		{
-			.reg = BD71837_REG_BUCK1_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK2_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK3_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK4_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK5_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK6_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK7_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK8_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_LDO1_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO2_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO3_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO4_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO5_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO6_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO7_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}
+	struct bd718xx_pmic_inits pmic_regulators[] = {
+		[BD718XX_TYPE_BD71837] = {
+			.r_datas = &bd71837_regulators,
+			.r_amount = ARRAY_SIZE(bd71837_regulators),
+		},
+		[BD718XX_TYPE_BD71847] = {
+			.r_datas = &bd71847_regulators,
+			.r_amount = ARRAY_SIZE(bd71847_regulators),
+		},
 	};
 
-	int i, err;
+	int i, j, err;
 
 	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
 	if (!pmic)
 		return -ENOMEM;
 
-	memcpy(pmic->descs, bd71837_regulators, sizeof(pmic->descs));
-
 	pmic->pdev = pdev;
 	pmic->mfd = dev_get_drvdata(pdev->dev.parent);
 
@@ -556,44 +952,34 @@ static int bd71837_probe(struct platform_device *pdev)
 		err = -EINVAL;
 		goto err;
 	}
+	if (pmic->mfd->chip_type >= BD718XX_TYPE_AMNT ||
+	    !pmic_regulators[pmic->mfd->chip_type].r_datas) {
+		dev_err(&pdev->dev, "Unsupported chip type\n");
+		err = -EINVAL;
+		goto err;
+	}
+
 	platform_set_drvdata(pdev, pmic);
 
 	/* Register LOCK release */
-	err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK,
+	err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_REGLOCK,
 				 (REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
 	if (err) {
 		dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err);
 		goto err;
 	} else {
 		dev_dbg(&pmic->pdev->dev, "Unlocked lock register 0x%x\n",
-			BD71837_REG_REGLOCK);
-	}
-
-	/*
-	 * There is a HW quirk in BD71837. The shutdown sequence timings for
-	 * bucks/LDOs which are controlled via register interface are changed.
-	 * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the
-	 * beginning of shut-down sequence. As bucks 6 and 7 are parent
-	 * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage
-	 * monitoring to errorneously detect under voltage and force PMIC to
-	 * emergency state instead of poweroff. In order to avoid this we
-	 * disable voltage monitoring for LDO5 and LDO6
-	 */
-	err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_MVRFLTMASK2,
-				 BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80,
-				 BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80);
-	if (err) {
-		dev_err(&pmic->pdev->dev,
-			"Failed to disable voltage monitoring\n");
-		goto err;
+			BD718XX_REG_REGLOCK);
 	}
 
-	for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) {
+	for (i = 0; i < pmic_regulators[pmic->mfd->chip_type].r_amount; i++) {
 
-		struct regulator_desc *desc;
+		const struct regulator_desc *desc;
 		struct regulator_dev *rdev;
+		const struct bd718xx_regulator_data *r;
 
-		desc = &pmic->descs[i];
+		r = &(*pmic_regulators[pmic->mfd->chip_type].r_datas)[i];
+		desc = &r->desc;
 
 		config.dev = pdev->dev.parent;
 		config.driver_data = pmic;
@@ -613,16 +999,26 @@ static int bd71837_probe(struct platform_device *pdev)
 		 * can now switch the control from PMIC state machine to the
 		 * register interface
 		 */
-		err = regmap_update_bits(pmic->mfd->regmap,
-					 pmic_regulator_inits[i].reg,
-					 pmic_regulator_inits[i].mask,
-					 0xFFFFFFFF);
+		err = regmap_update_bits(pmic->mfd->regmap, r->init.reg,
+					 r->init.mask, r->init.val);
 		if (err) {
 			dev_err(&pmic->pdev->dev,
 				"Failed to write BUCK/LDO SEL bit for (%s)\n",
 				desc->name);
 			goto err;
 		}
+		for (j = 0; j < r->additional_init_amnt; j++) {
+			err = regmap_update_bits(pmic->mfd->regmap,
+						 r->additional_inits[j].reg,
+						 r->additional_inits[j].mask,
+						 r->additional_inits[j].val);
+			if (err) {
+				dev_err(&pmic->pdev->dev,
+					"Buck (%s) initialization failed\n",
+					desc->name);
+				goto err;
+			}
+		}
 
 		pmic->rdev[i] = rdev;
 	}
@@ -633,7 +1029,7 @@ static int bd71837_probe(struct platform_device *pdev)
 
 static struct platform_driver bd71837_regulator = {
 	.driver = {
-		.name = "bd71837-pmic",
+		.name = "bd718xx-pmic",
 	},
 	.probe = bd71837_probe,
 };
diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h
index e8338e5dc10b..d1ed232e669e 100644
--- a/include/linux/mfd/rohm-bd718x7.h
+++ b/include/linux/mfd/rohm-bd718x7.h
@@ -7,106 +7,125 @@
 #include <linux/regmap.h>
 
 enum {
-	BD71837_BUCK1	=	0,
-	BD71837_BUCK2,
-	BD71837_BUCK3,
-	BD71837_BUCK4,
-	BD71837_BUCK5,
-	BD71837_BUCK6,
-	BD71837_BUCK7,
-	BD71837_BUCK8,
-	BD71837_LDO1,
-	BD71837_LDO2,
-	BD71837_LDO3,
-	BD71837_LDO4,
-	BD71837_LDO5,
-	BD71837_LDO6,
-	BD71837_LDO7,
-	BD71837_REGULATOR_CNT,
+	BD718XX_TYPE_BD71837,
+	BD718XX_TYPE_BD71847,
+	BD718XX_TYPE_AMNT // Keep this as last item
 };
 
-#define BD71837_BUCK1_VOLTAGE_NUM	0x40
-#define BD71837_BUCK2_VOLTAGE_NUM	0x40
-#define BD71837_BUCK3_VOLTAGE_NUM	0x40
-#define BD71837_BUCK4_VOLTAGE_NUM	0x40
+enum {
+	BD718XX_BUCK1	=	0,
+	BD718XX_BUCK2,
+	BD718XX_BUCK3,
+	BD718XX_BUCK4,
+	BD718XX_BUCK5,
+	BD718XX_BUCK6,
+	BD718XX_BUCK7,
+	BD718XX_BUCK8,
+	BD718XX_LDO1,
+	BD718XX_LDO2,
+	BD718XX_LDO3,
+	BD718XX_LDO4,
+	BD718XX_LDO5,
+	BD718XX_LDO6,
+	BD718XX_LDO7,
+	BD718XX_REGULATOR_MAX,
+};
+
+/* Common voltage configurations
+ *
+ * Note, we support only one range of voltages for each buck/LDO until we
+ * get pickable ranges support. (See range selection bits for BUCK5 and
+ * LDO1. On BD71847 also the second no DVS buck and LDO5)
+ */
+
+#define BD718XX_DVS_BUCK_VOLTAGE_NUM		0x3D
+#define BD718XX_1ST_NODVS_BUCK_VOLTAGE_NUM	0x08
+#define BD71837_4TH_NODVS_BUCK_VOLTAGE_NUM	0x3D
+
+#define BD718XX_LDO1_VOLTAGE_NUM	0x04
+#define BD718XX_LDO2_VOLTAGE_NUM	0x02
+#define BD718XX_LDO3_VOLTAGE_NUM	0x10
+#define BD718XX_LDO4_VOLTAGE_NUM	0x0A
+#define BD718XX_LDO5_VOLTAGE_NUM	0x10
+#define BD718XX_LDO6_VOLTAGE_NUM	0x0A
 
-#define BD71837_BUCK5_VOLTAGE_NUM	0x08
+/* BD71837 specific voltage configurations */
 #define BD71837_BUCK6_VOLTAGE_NUM	0x04
 #define BD71837_BUCK7_VOLTAGE_NUM	0x08
-#define BD71837_BUCK8_VOLTAGE_NUM	0x40
-
-#define BD71837_LDO1_VOLTAGE_NUM	0x04
-#define BD71837_LDO2_VOLTAGE_NUM	0x02
-#define BD71837_LDO3_VOLTAGE_NUM	0x10
-#define BD71837_LDO4_VOLTAGE_NUM	0x10
-#define BD71837_LDO5_VOLTAGE_NUM	0x10
-#define BD71837_LDO6_VOLTAGE_NUM	0x10
 #define BD71837_LDO7_VOLTAGE_NUM	0x10
 
+/* BD71847 specific voltage configurations */
+#define BD71847_BUCK4_VOLTAGE_NUM	0x04
+
+/* Registers specific to BD71837 */
 enum {
-	BD71837_REG_REV                = 0x00,
-	BD71837_REG_SWRESET            = 0x01,
-	BD71837_REG_I2C_DEV            = 0x02,
-	BD71837_REG_PWRCTRL0           = 0x03,
-	BD71837_REG_PWRCTRL1           = 0x04,
-	BD71837_REG_BUCK1_CTRL         = 0x05,
-	BD71837_REG_BUCK2_CTRL         = 0x06,
-	BD71837_REG_BUCK3_CTRL         = 0x07,
-	BD71837_REG_BUCK4_CTRL         = 0x08,
-	BD71837_REG_BUCK5_CTRL         = 0x09,
-	BD71837_REG_BUCK6_CTRL         = 0x0A,
-	BD71837_REG_BUCK7_CTRL         = 0x0B,
-	BD71837_REG_BUCK8_CTRL         = 0x0C,
-	BD71837_REG_BUCK1_VOLT_RUN     = 0x0D,
-	BD71837_REG_BUCK1_VOLT_IDLE    = 0x0E,
-	BD71837_REG_BUCK1_VOLT_SUSP    = 0x0F,
-	BD71837_REG_BUCK2_VOLT_RUN     = 0x10,
-	BD71837_REG_BUCK2_VOLT_IDLE    = 0x11,
-	BD71837_REG_BUCK3_VOLT_RUN     = 0x12,
-	BD71837_REG_BUCK4_VOLT_RUN     = 0x13,
-	BD71837_REG_BUCK5_VOLT         = 0x14,
-	BD71837_REG_BUCK6_VOLT         = 0x15,
-	BD71837_REG_BUCK7_VOLT         = 0x16,
-	BD71837_REG_BUCK8_VOLT         = 0x17,
-	BD71837_REG_LDO1_VOLT          = 0x18,
-	BD71837_REG_LDO2_VOLT          = 0x19,
-	BD71837_REG_LDO3_VOLT          = 0x1A,
-	BD71837_REG_LDO4_VOLT          = 0x1B,
-	BD71837_REG_LDO5_VOLT          = 0x1C,
-	BD71837_REG_LDO6_VOLT          = 0x1D,
-	BD71837_REG_LDO7_VOLT          = 0x1E,
-	BD71837_REG_TRANS_COND0        = 0x1F,
-	BD71837_REG_TRANS_COND1        = 0x20,
-	BD71837_REG_VRFAULTEN          = 0x21,
-	BD718XX_REG_MVRFLTMASK0        = 0x22,
-	BD718XX_REG_MVRFLTMASK1        = 0x23,
-	BD718XX_REG_MVRFLTMASK2        = 0x24,
-	BD71837_REG_RCVCFG             = 0x25,
-	BD71837_REG_RCVNUM             = 0x26,
-	BD71837_REG_PWRONCONFIG0       = 0x27,
-	BD71837_REG_PWRONCONFIG1       = 0x28,
-	BD71837_REG_RESETSRC           = 0x29,
-	BD71837_REG_MIRQ               = 0x2A,
-	BD71837_REG_IRQ                = 0x2B,
-	BD71837_REG_IN_MON             = 0x2C,
-	BD71837_REG_POW_STATE          = 0x2D,
-	BD71837_REG_OUT32K             = 0x2E,
-	BD71837_REG_REGLOCK            = 0x2F,
-	BD71837_REG_OTPVER             = 0xFF,
-	BD71837_MAX_REGISTER           = 0x100,
+	BD71837_REG_BUCK3_CTRL =	0x07,
+	BD71837_REG_BUCK4_CTRL =	0x08,
+	BD71837_REG_BUCK3_VOLT_RUN =	0x12,
+	BD71837_REG_BUCK4_VOLT_RUN =	0x13,
+	BD71837_REG_LDO7_VOLT =		0x1E,
+};
+
+/* Registers common for BD71837 and BD71847 */
+enum {
+	BD718XX_REG_REV =			0x00,
+	BD718XX_REG_SWRESET =			0x01,
+	BD718XX_REG_I2C_DEV =			0x02,
+	BD718XX_REG_PWRCTRL0 =			0x03,
+	BD718XX_REG_PWRCTRL1 =			0x04,
+	BD718XX_REG_BUCK1_CTRL =		0x05,
+	BD718XX_REG_BUCK2_CTRL =		0x06,
+	BD718XX_REG_1ST_NODVS_BUCK_CTRL =	0x09,
+	BD718XX_REG_2ND_NODVS_BUCK_CTRL =	0x0A,
+	BD718XX_REG_3RD_NODVS_BUCK_CTRL =	0x0B,
+	BD718XX_REG_4TH_NODVS_BUCK_CTRL =	0x0C,
+	BD718XX_REG_BUCK1_VOLT_RUN =		0x0D,
+	BD718XX_REG_BUCK1_VOLT_IDLE =		0x0E,
+	BD718XX_REG_BUCK1_VOLT_SUSP =		0x0F,
+	BD718XX_REG_BUCK2_VOLT_RUN =		0x10,
+	BD718XX_REG_BUCK2_VOLT_IDLE =		0x11,
+	BD718XX_REG_1ST_NODVS_BUCK_VOLT =	0x14,
+	BD718XX_REG_2ND_NODVS_BUCK_VOLT =	0x15,
+	BD718XX_REG_3RD_NODVS_BUCK_VOLT =	0x16,
+	BD718XX_REG_4TH_NODVS_BUCK_VOLT =	0x17,
+	BD718XX_REG_LDO1_VOLT =			0x18,
+	BD718XX_REG_LDO2_VOLT =			0x19,
+	BD718XX_REG_LDO3_VOLT =			0x1A,
+	BD718XX_REG_LDO4_VOLT =			0x1B,
+	BD718XX_REG_LDO5_VOLT =			0x1C,
+	BD718XX_REG_LDO6_VOLT =			0x1D,
+	BD718XX_REG_TRANS_COND0 =		0x1F,
+	BD718XX_REG_TRANS_COND1 =		0x20,
+	BD718XX_REG_VRFAULTEN =			0x21,
+	BD718XX_REG_MVRFLTMASK0 =		0x22,
+	BD718XX_REG_MVRFLTMASK1 =		0x23,
+	BD718XX_REG_MVRFLTMASK2 =		0x24,
+	BD718XX_REG_RCVCFG =			0x25,
+	BD718XX_REG_RCVNUM =			0x26,
+	BD718XX_REG_PWRONCONFIG0 =		0x27,
+	BD718XX_REG_PWRONCONFIG1 =		0x28,
+	BD718XX_REG_RESETSRC =			0x29,
+	BD718XX_REG_MIRQ =			0x2A,
+	BD718XX_REG_IRQ =			0x2B,
+	BD718XX_REG_IN_MON =			0x2C,
+	BD718XX_REG_POW_STATE =			0x2D,
+	BD718XX_REG_OUT32K =			0x2E,
+	BD718XX_REG_REGLOCK =			0x2F,
+	BD718XX_REG_OTPVER =			0xFF,
+	BD718XX_MAX_REGISTER =			0x100,
 };
 
 #define REGLOCK_PWRSEQ	0x1
 #define REGLOCK_VREG	0x10
 
 /* Generic BUCK control masks */
-#define BD71837_BUCK_SEL	0x02
-#define BD71837_BUCK_EN		0x01
-#define BD71837_BUCK_RUN_ON	0x04
+#define BD718XX_BUCK_SEL	0x02
+#define BD718XX_BUCK_EN		0x01
+#define BD718XX_BUCK_RUN_ON	0x04
 
 /* Generic LDO masks */
-#define BD71837_LDO_SEL		0x80
-#define BD71837_LDO_EN		0x40
+#define BD718XX_LDO_SEL		0x80
+#define BD718XX_LDO_EN		0x40
 
 /* BD71837 BUCK ramp rate CTRL reg bits */
 #define BUCK_RAMPRATE_MASK	0xC0
@@ -115,49 +134,27 @@ enum {
 #define BUCK_RAMPRATE_2P50MV	0x2
 #define BUCK_RAMPRATE_1P25MV	0x3
 
-/* BD71837_REG_BUCK1_VOLT_RUN bits */
-#define BUCK1_RUN_MASK		0x3F
-#define BUCK1_RUN_DEFAULT	0x14
-
-/* BD71837_REG_BUCK1_VOLT_SUSP bits */
-#define BUCK1_SUSP_MASK		0x3F
-#define BUCK1_SUSP_DEFAULT	0x14
+#define DVS_BUCK_RUN_MASK	0x3F
+#define DVS_BUCK_SUSP_MASK	0x3F
+#define DVS_BUCK_IDLE_MASK	0x3F
 
-/* BD71837_REG_BUCK1_VOLT_IDLE bits */
-#define BUCK1_IDLE_MASK		0x3F
-#define BUCK1_IDLE_DEFAULT	0x14
+#define BD718XX_1ST_NODVS_BUCK_MASK	0x07
+#define BD71847_BUCK4_MASK		0x03
+#define BD71837_BUCK6_MASK		0x03
+#define BD718XX_3RD_NODVS_BUCK_MASK	0x07
+#define BD718XX_4TH_NODVS_BUCK_MASK	0x3F
 
-/* BD71837_REG_BUCK2_VOLT_RUN bits */
-#define BUCK2_RUN_MASK		0x3F
-#define BUCK2_RUN_DEFAULT	0x1E
+#define BD718XX_LDO1_MASK		0x03
+#define BD718XX_LDO2_MASK		0x20
+#define BD718XX_LDO3_MASK		0x0F
+#define BD718XX_LDO4_MASK		0x0F
+#define BD718XX_LDO6_MASK		0x0F
 
-/* BD71837_REG_BUCK2_VOLT_IDLE bits */
-#define BUCK2_IDLE_MASK		0x3F
-#define BUCK2_IDLE_DEFAULT	0x14
+#define BD71837_LDO5_MASK		0x0F
+#define BD71847_LDO5_MASK		0x0F
 
-/* BD71837_REG_BUCK3_VOLT_RUN bits */
-#define BUCK3_RUN_MASK		0x3F
-#define BUCK3_RUN_DEFAULT	0x1E
+#define BD71837_LDO7_MASK		0x0F
 
-/* BD71837_REG_BUCK4_VOLT_RUN bits */
-#define BUCK4_RUN_MASK		0x3F
-#define BUCK4_RUN_DEFAULT	0x1E
-
-/* BD71837_REG_BUCK5_VOLT bits */
-#define BUCK5_MASK		0x07
-#define BUCK5_DEFAULT		0x02
-
-/* BD71837_REG_BUCK6_VOLT bits */
-#define BUCK6_MASK		0x03
-#define BUCK6_DEFAULT		0x03
-
-/* BD71837_REG_BUCK7_VOLT bits */
-#define BUCK7_MASK		0x07
-#define BUCK7_DEFAULT		0x03
-
-/* BD71837_REG_BUCK8_VOLT bits */
-#define BUCK8_MASK		0x3F
-#define BUCK8_DEFAULT		0x1E
 
 /* BD718XX Voltage monitoring masks */
 #define BD718XX_BUCK1_VRMON80           0x1
@@ -221,27 +218,6 @@ enum {
 #define BD71837_INT_ON_REQ_MASK		0x2
 #define BD71837_INT_STBY_REQ_MASK	0x1
 
-/* BD71837_REG_LDO1_VOLT bits */
-#define LDO1_MASK		0x03
-
-/* BD71837_REG_LDO1_VOLT bits */
-#define LDO2_MASK		0x20
-
-/* BD71837_REG_LDO3_VOLT bits */
-#define LDO3_MASK		0x0F
-
-/* BD71837_REG_LDO4_VOLT bits */
-#define LDO4_MASK		0x0F
-
-/* BD71837_REG_LDO5_VOLT bits */
-#define LDO5_MASK		0x0F
-
-/* BD71837_REG_LDO6_VOLT bits */
-#define LDO6_MASK		0x0F
-
-/* BD71837_REG_LDO7_VOLT bits */
-#define LDO7_MASK		0x0F
-
 /* Register write induced reset settings */
 
 /*
@@ -341,10 +317,12 @@ enum {
 	BD718XX_PWRBTN_LONG_PRESS_15S
 };
 
-struct bd71837_pmic;
-struct bd71837_clk;
+struct bd718xx_pmic;
+struct bd718xx_clk;
 
 struct bd71837 {
+	unsigned int chip_type;
+	unsigned int chip_rev;
 	struct device *dev;
 	struct regmap *regmap;
 	unsigned long int id;
@@ -352,8 +330,8 @@ struct bd71837 {
 	int chip_irq;
 	struct regmap_irq_chip_data *irq_data;
 
-	struct bd71837_pmic *pmic;
-	struct bd71837_clk *clk;
+	struct bd718xx_pmic *pmic;
+	struct bd718xx_clk *clk;
 };
 
 #endif /* __LINUX_MFD_BD71837_H__ */
-- 
2.14.3





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux