From: Rajesh Bhagat <rajesh.bhagat@xxxxxxxxxxxxx>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustment is required or
not
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@xxxxxxx>
Signed-off-by: Ran Wang <ran.wang_1@xxxxxxx>
Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
---
Change in v2:
Modified some word misspellings in commit information
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d..ed3fa79 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -609,6 +609,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};
usb1: usb3@3000000 {
@@ -618,6 +619,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};
usb2: usb3@3100000 {
@@ -627,6 +629,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};
sata: sata@3200000 {
--
1.7.1
